Calculate the final stress in the bar and the cylinder if

Assignment Help Mechanical Engineering
Reference no: EM13622911

A bar of mild steel has a diameter of 75 mm and is placed inside a hollow aluminum cylinder of internal diameter 75 mm and external diameter 100 mm; both bar and cylinder are the same length. The resulting composite bar is subjected to an axial compressive load of 1000 kN. If the bar and cylinder contract by the same amount, calculate the stress in each. The temperature of the compressed composite bar is then reduced by 150 C but no change in length is permitted. Calculate the final stress in the bar and the cylinder if E(steel)= 200,000 N/mm^2, E(aluminum)= 80,000 N/mm^2, coefficient of linear expansion for steel= 0.0000012/C and coefficient of linear expansion for aluminum= 0.000005/C.

Reference no: EM13622911

Questions Cloud

Calculate the mass in kg of oxygen that has been released : a 10 m3 oxygen tank is at 15 degree c and 800 kpa. the valve is opened and some oxygen is allowed to escape until the
There are 20 questions on the test responces are ab c and : there are 20 questions on the test. responces are ab c and d. each question is 5 points and only one response is
The expected return on jk stock is 1578 percent while the : the expected return on jk stock is 15.78 percent while the expected return on the market is 11.34 percent. the stocks
A magnet at the end of the dial-o-gram balance arm the arm : a magnet at the end of the dial-o-gram balance arm. the arm has an aluminum plate in the magnetic gap. what is the
Calculate the final stress in the bar and the cylinder if : a bar of mild steel has a diameter of 75 mm and is placed inside a hollow aluminum cylinder of internal diameter 75 mm
Introducing the more efficient macine is exxpected to : 1.for a new project indigo ink inc. had lanned on depreciating new machinery that costs 300 million on a 4-year
A 180-kg cannonball is fired from a cannon with muzzle : a 18.0-kg cannonball is fired from a cannon with muzzle speed of 850msat an angle of33.0degwith the horizontal. a
The expected life of refrigerators produced by the : the expected life of refrigerators produced by the keepitcool company are normally distributed with a mean of 240
What energy must an alpha particle q 2e m 40 u and a : in a nuclear experiment a proton with kinetic energy 9.0 mev moves in a circular path in a uniform magnetic field. if

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What is the maximum torque it can supply at 120 rated speed

if a vsdmotor combination has a torque of 100 n.m at the rated speed and full power what is the maximum torque it can

  The gate opens when water levels reaches h2m on the left

water gate is hinged at point o. angle between the gate and the ground is given alpha 60 degrees. the gate opens when

  The model pump has am impeller diameter of 10 cm and a

a 15 scale model of centrifugal water pump was tested. the model pump has am impeller diameter of 10 cm and a rotation

  Compare this result with the heat loss if the window had a

a thermopane window consists of two 6-mm thick glasses separated by a stagnant air space of thickness 6 mm. the thermal

  How many positive impulses will be counted per second

A magnetic pickup is used to detect the shaft speed of a turbocharger. A standard hexagonal nut is used to excite the pickup. If the shaft is turning at 50,000 rpm, how many positive impulses will be counted per second?

  Assuming that the condensate flow is laminar calculate the

in a laboratory steam is condensed at atmospheric pressure i.e. 212degf on the shell-side of a vertically-oriented

  Problem 1a steel simple beam ab is supported by a copper

problem 1a steel simple beam ab is supported by a copper wire at the middle point c. the beam is subjected to a pair of

  Calculate the specific heat at constant pressure

Calculate the specific heat at constant pressure, and specific heat at constant volume for propane which is compressed at the following inlet condition;

  The temperature of the water is 50 f determine the darcy

flow and pressure measurements are used to estimate the friction factor for a pipeline. the length of the pipeline

  Determine the steady-state solution for the following

determine the steady-state solution for the following differential equations. if resonance exists for the equations

  92 of the thermal energy supplied by the combustion process

methane gas enteres a steady flow steady state boiler and burns with 140 theoretical hydrogen peroxide h2o2 gas which

  Determine the total electrical work the heat pump can

a carnot heat pump is to be used for heating house in winter. the house temperature is set at 25oc. one day the outdoor

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd