Calculate the final angular speed of the discus

Assignment Help Physics
Reference no: EM13545868

A discus thrower accelerates a discus from rest to a speed of 24.9 m/s by whirling it through 1.22 rev. Assume the discus moves on the arc of a circle 1.01 m in radius.

(a) Calculate the final angular speed of the discus.

(b) Determine the magnitude of the angular acceleration of the discus, assuming it to be constant.

(c) Calculate the time interval required for the discus to accelerate from rest to 24.9 m/s.

Reference no: EM13545868

Questions Cloud

What is the maximum voltage across the inductor : A 130 resistor, a 5.00×10?2microF capacitor, and a 260mF inductor are connected in series to a voltage source with amplitude 240 V. What is the maximum voltage across the inductor at resonance
Evaluate the molar extinction coefficient for caffeine : UV Spectrum of caffeine: Calculate the molar extinction coefficient (e) for caffeine. Show all your work. Note: Assume the diameter to be the cell holder to be 1 cm.
How long does the wheel take to reach its final speed : A grinding wheel is in the form of a uniform solid disk of radius 6.99 cm and mass 2.02 kg. How long does the wheel take to reach its final operating speed
Find the tension in the lower segment of the belt : An electric motor turns a flywheel through a drive belt that joins a pulley on the motor and a pulley that is rigidly attached to the flywheel, Find the tension in the lower (slack) segment of the belt
Calculate the final angular speed of the discus : A discus thrower accelerates a discus from rest to a speed of 24.9 m/s by whirling it through 1.22 rev. Calculate the final angular speed of the discus
Find the greatest possible value of fundamental frequency : A string, stretched between two fixed posts, forms standing wave resonances at 350 Hz and 420 Hz. What is the greatest possible value of its fundamental frequency
Evaluate the amount by which the length of stack decreases : A copper cylinder and a brass cylinder are stacked end to end, as in the drawing. Each cylinder has a radius of 0.30 cm. Find the amount by which the length of the stack decreases
Calculate the work done by the force of gravity : A 340kg piano slides 3.5m down a 29degree incline and is kept from accelerating by a man who is pushing back on it parallel to the incline. The effective coefficient of kinetic friction is 0.30.
Determine the radial acceleration of a point on the rim : A disk 7.96 cm in radius rotates at a constant rate of 1 150 rev/min about its central axis. Determine the radial acceleration of a point on the rim

Reviews

Write a Review

Physics Questions & Answers

  What is the magnitude of impulse on lizard during the slap

Basilisk lizards can run across the top of a water surface. With each step, a lizard first slaps its foot against the water and then pushes it down into the water rapidly enough to form an air cavity around the top of the foot.

  Two circular metal plates of radius-what is capacitance

Two circular metal plates of radius 0.21 m and thickness 8.3 mm are used in a parallel plate capacitor. A gap of 3.9 mm is left between the plates, and half of the space (a semicircle) between the plates is filled with a dielectric for which ? = 10.9..

  What is the magnitude of the cable tension

Consider a weathered rock or soil particle lying on a slope. How would the gravitational force pulling the particle downward along the land surface vary with the inclination of the slope.

  What is the amplitude of oscillation

A damped mass-spring system oscillates at 280 Hz. The time constant of the system is 2.0 s. At t = 0, the amplitude of oscillation is 8.4 cm and the energy of the oscillating system is then 84 J.

  Determine the work function for this metal

Two light sources are used in a photoelectric experiment to determine the work function for a particular metal surface. Based on this measurement, what is the work function for this metal

  What is the magnitude of the maximum charge on one plate

A capacitor is connected across an ac generator whose frequency is 751 Hz and whose peak output voltage is 140 V. What is the magnitude of the maximum charge on one plate of the capacitor

  Find out the speed of the block

An ideal spring with a stiffness of 379N/m is attached to a wall, and its other end is attached to a block that has a mass of 16-kg. The spring/block system is then stretched away from the spring's relaxed position until 59J of mechanical potentia..

  How much energy would be available through fusion

Then the driver sees a red light up ahead at next intersection, and starts slowing down at the constant rate. The car stops at the red light, 180 {rm m} from where it was at t = 0.

  Where should the film be placed

A camera has a f=50 mm (f=5 cm) lens. A 1.0 mm (0.1cm) tall ant is 200 mm (20 cm) from the lens. Where should the film be placed

  How many half-lives are required

How many half-lives are required for the number of radioactive nuclei to decrease to 1/10^5 of the initial number

  How far does tina drive before passing david

David is driving a steady 21.0m/s when he passes Tina, who is sitting in her car at rest. How far does Tina drive before passing David

  What is the frisbees rotational inertia

A 111g Frisbee is 25cm in diameter and has half its mass spread uniformly in the disk and the other half concentrated in the rim. What is the Frisbee's rotational inertia

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd