Calculate the equivalent series impedance of the transformer

Assignment Help Electrical Engineering
Reference no: EM13251715

The nameplate on a 50-MVA, 60-Hz single-phase transformer indicates that it has a voltage rating of 8.0-kV: 78-kV. An open-circuit test is conducted from the low-voltage side, and the corresponding instrument readings are 8.0kV, 62.1A, and 206kW. Similarly, a short-circuit test from the low-voltage side gives readings of 674 V, 6.25 kA, and 187 kW.

a. Calculate the equivalent series impedance, resistance, and reactance of the transformer as referred to the low-voltage terminals.

b. Calculate the equivalent series impedance of the transformer as referred to the high-voltage terminals.

c. Making appropriate approximations draw a T equivalent circuit for the transformer.

d. Determine the efficiency and voltage regulation if the transformer is operating at the rated voltage and load (unity power factor).

Reference no: EM13251715

Questions Cloud

What is the distance on the screen : the distance between the slits in the two-slit experiment is 1.50 x 10^ -5 m. What is the distance on the screen between the central bright fringe and the 4th order bright fringe
What is the capacity of the assembly line per hour : DHP is a company that assembles and sells computers. Suppose DHP has only one sequential process to produce PCs. Under the current process layout, each step has one worker assigned to it (total 7 workers).
What is percentage change of af corresponding to factor : A negative feedback amplifier has a close-loop gain Af=100 and an open-loop gain A=105. What is the feedback factor If a manufacturing error results in a reduction of A to 103, what close-loop gain results
Find the wavelength of light : In the two-slit experiment, the distance between the slits and the screen is 1.10 m and the distance between the slits is 0.100 mm. what is the wavelength of light
Calculate the equivalent series impedance of the transformer : The nameplate on a 50-MVA, 60-Hz single-phase transformer indicates that it has a voltage rating of 8.0-kV: 78-kV. An open-circuit test is conducted from the low-voltage side, and the corresponding instrument readings are 8.0kV, 62.1A, and 206kW.
Criminal justice practice and policy : What principles from the Classical School continue to characterize modern thought on crime? In terms of criminal justice practice and policy, does fulfilling one of these principles present problems in fulfilling another?
Determine the minimum thickness of the film : A 500 nm wavelength light illuminates a soap film with an index of refraction 1.22 to make it look bright. what is the minimum thickness of the film
Humanity exist without some notion of natural law : How do atrocities, such as those committed by the Nazis in World War II, relate to natural law? Would crimes against humanity exist without some notion of natural law?
Find the magnitude of the velocity at launch : A man slides along a long water slide and then being launched into the air to land in a water pool. Find the magnitude of the velocity at launch

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Can the phase information be obtained from an oscilloscope

Construct a Phasor Diagram to represent the source voltage, source current, voltage drops, VR, and VL across the resistor and the inductor. The diagram does not need to be drawn to scale. However, the values of the items represented must be includ..

  Explain what is the input impedance

If we have a 600ohm transmission line terminated with a 1200ohm resistor, how long must the transmission line be if the input impedance is purely real?

  Design circuit to amplify the difference in battery voltage

The difference in voltage (Bat A - Bat B) should be displayed on a +5V - 0 -5V meter. Each volt on the meter display should correspond to 10 mV of battery difference. Include your choice for all components and power supply voltages.

  Draw a ladder logic diagram to control the process

A small house has three windows and two doors. Each window and door has a switch attached such that the contacts close when a door or window opens. Draw a ladder logic diagram that will turn on a light if one or more windows are open or if both do..

  Find two designs using open-circuited stubs

A load impedance ZL = 100 + j80 is to be matched to a 75 ohm line using a single shunt-stub tuner. Find two designs using open-circuited stubs. Include both smith chart and analytical analysis.

  What are the resistance value and tolerance

Look at the resistor illustrated. Based on your knowledge of the resistor color code, what are the resistance value and tolerance of this resistor?

  Design a circuit that might be used as a trigger

Design a circuit that might be used as a trigger for a night-light. You are given a photoresistor whose resistance changes from 5k when inside a lighted room to 30k in a dark room. Design a voltage divider circuit that will provide a 3V

  Calculate equivalent series impedance and resistance

The nameplate on a 50-MVA, 60-Hz single-phase transformer indicates that it has a voltage rating of 8.0-kV: 78-kV. An open-circuit test is conducted from the low-voltage side, and the corresponding instrument readings are 8.0kV, 62.1A, and 206kW.

  Digital communications -order the following modulation types

Digital Communications, Order the following modulation types in terms of spectral efficiency (best to worse) and explain

  What is the theoretical barrier height of semiconductor

Consider two Si samples; one is p-type doped to 1018/cm3 acceptor atoms and the other one n-type doped to 1015/cm3 donor atoms at room temperature (300K). a. Draw the band diagram associated with p-type and n-type semiconductors, noting the various..

  Explain a cable tv company delivers video signals

A cable TV company delivers video signals over coaxial cable to individual houses. Video signals occupy a bandwidth of 6 MHz and are stacked in frequency from 50 MHz to 656 MHz without guard bands

  What is the error when the arm position is at 15 degree

The controlled variable in a closed-loop system is the direction of a robot arm. Initially, it is at 40o; then it is commanded to go to 22o. What is the error when the arm position is at 15o

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd