Calculate the energy lost to the surroundings

Assignment Help Physics
Reference no: EM13955862

1. A projectile of mass 0.6 kg is fired vertically upwards in the barrel of a gun by a vertical net propelling force of 50 N acting over a period of0.5 seconds.

Calculate:

(a) The velocity of the projectile when it leaves the gun.
(b) The height reached by the projectile.
(c) The time taken from the projectile leaving the gun to its return to the same height.

2. A flywheel (A) with a mass of 100 kg and radius of gyration 1200 mm rotates at 150 revs min-1 (clockwise). The kinetic energy of this flywheel is to be reduced by 20% by impacting it with a second flywheel (B) rotating at 80 revs min-1 in the opposite direction, such that they have the same (clockwise) angular velocity after impact.

(a) Calculate the required mass of flywheel (B) if its radius of gyration is 800 mm.

(b) Calculate the energy lost to the surroundings.

(c) Is the impact elastic? Give reasons for your answer.

3. A container of mass 100 kg runs on overhead rails. The container is mounted on two wheels each having a mass of 15 kg, a diameter of 1.2 m and a radius of gyration of 0.4 m.

673_Untitled.png

Calculate:

(a) The total kinetic energy of the vehicle when travelling at 4 m s-1.

(b) The spring stiffness required to bring the vehicle to rest in a distance of 300 mm.

4. For a given spring-mass system, what would be the effect on ω of:

(a) Increasing the size of the mass

(b) Increasing the amplitude of vibration

(c) Increasing the spring stiffness

(d) Increasing the phase lag.

5. A mass attached to the lower end of a vertical spring causes the spring to extend by 25 mm to its equilibrium position. The mass is then displaced a further 20 mm and released. A trace of the vibration and time measurements are taken. From these measurements it can be seen that the displacement from the equilibrium position is 19.2 mm when the time is 0.05 s.

(a) Calculate the expected frequency of vibration.

(b) Calculate the maximum acceleration of the mass.

(c) Calculate the maximum velocity of the mass.

(d) Write the expression for the displacement of the mass as a function of time.

(e) Write the expression for the velocity of the mass as a function of time.

(f) Write the expression for the acceleration of the mass as a function of time.

Reference no: EM13955862

Questions Cloud

Determine the probability that galloping gary wins the horse : If someone driving in New Orleans tuned into an FM radio station with high signal strength at random, what would be the chances he would get a Rock or Hip hop station? Give answer as a fraction in lowest terms.
Identify the substantive audit procedures you would perform : Prepare adjustment entries as necessary. Identify the substantive audit procedures you would perform to test the transaction.
Complete a swot analysis for the selected industry : Complete a SWOT analysis for the selected industry. The SWOT analysis allows a business to understand how a competitor is positioned in the environment by assessing its strengths, weaknesses, opportunities, and threats. An understanding of a compe..
How does terminal velocity scale with size of falling object : Find an equation for the terminal velocity of a sphere falling through a viscous fluid (like water or blood). How does the terminal velocity scale with the size of the falling object? Assume that the density of that object is much larger than that..
Calculate the energy lost to the surroundings : A projectile of mass 0.6 kg is fired vertically upwards in the barrel of a gun by a vertical net propelling force of 50 N acting over a period of0.5 seconds. Calculate the velocity of the projectile when it leaves the gun.
Sentencing report for the defendant : As the judge, you will be preparing a sentencing report for the defendant. Give the defendant a name and make up anything else that you think is useful for your report.
Would the given sample mean be considered unusual : The sample mean would or would not be considered be considered unusual because it lies or does not lie within 1 standard deviation, 2 standard deviations, or 3 standard deviations of the mean of the sample means.
What is the probability it was from manufacturer 2 : The Positively Charged company uses capacitors from two different manufacturers. Historically, 60% of the capacitors come from manufacturer 1
Designing computer-based accounting information systems : Define the ‘hard' and ‘soft' systems. With the aid of diagrams, comment on and discuss the difference between these two theoretical approaches and their implications on designing computer-based accounting information systems

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd