### Calculate the contact forces at a and b

Assignment Help Mechanical Engineering
##### Reference no: EM13212124

the 50-kg homogeneous smooth sphere rest on the 30 degree incline A and bears against the smooth vertical wall B. calculate the contact forces at A and B.

### Write a Review

#### The effect of fluid cooling

Write a  literature review and the title is "the effect of fluid cooling on the performance of building integrated photovoltaic thermal systems. Using some BIPVT prototypes measure their thermal and electrical output and dtermine their effectiveness"

#### Express the result as a cartesian vector

What is the couple moment of the two couples that act on the pipe assembly. The distance from A to B is d = 400 mm.express the result as a cartesian vector.

#### What is the airspeed of the plane

The airspeed of an aeroplane is measured with a Pitot tube. The plane is flying at an altitude of 10000m, and the Pitot tube measures a gauge pressure of p = 10kPa. What is the airspeed of the plane?

#### The desire is to raise the temperature of the ambient air

The desire is to raise the temperature of the ambient air from 60 degree F to 350 degrees F ---- I need to calculate the amount of steam energy in BTU's per minutes and lbs of steam per minute necessary to accomplish the increase in air temperatur..

#### Evaluate the maximum height reached by the sphere

Evaluate the maximum height reached by the sphere, and the distance traveled by the block.

#### Determine the factor of safety against brittle fracture

Determine the factor of safety against net section yield in the presence of the crack and determine the factor of safety against brittle fracture for the same conditions.

#### Explain the true altitude of the plane above sea level

What is the true altitude of the plane above sea level? What would be the indicated altitude after landing at an aerodrome located at sea level? (Gas const = R=288 J/KgK)

#### Find the transfer function for the impulse response

Find the transfer function for the following impulse response

#### Explain fluid statics- submerged submarine

Fluid Statics: Submerged Submarine, A submarine is at a depth of 2000 ft from the water surface. The atmospheric pressure above the water is at 14.7 psia

#### Find the steady-state temperature of the wire

Verify that heating the wire may be treated as a lumped-capacity process, find the steady-state temperature of the wire and find how long it takes for the temperature of the wire to reach 100°C.

#### Aerodynamics and flight mechanics

Write a short technical report on Frequency Division Multiplexing

#### Determine the pressure and the internal energy

refrigerant -134a at 800kPa and 25 C is throttled to a temperature of -20C. determine the pressure and the internal energy of the refrigerant at the final state.