Calculate the abcd constants of this transmission line

Assignment Help Electrical Engineering
Reference no: EM13967691

A 138 kV, 200 MVA, 60 Hz, three-phase, power transmission line is 100 km long, and has the following characteristics:

r = 0.103 W/km
x = 0.525 W/km
y = 3.3 ´ 10-6 S/km

(a) What is per phase series impedance and shunt admittance of this transmission line?

(b) Should it be modeled as a short, medium, or long transmission line?

(c) Calculate the ABCD constants of this transmission line.

(d) Sketch the phasor diagram of this transmission line when the line is supplying rated voltage and apparent power at a 0.90 power factor lagging.

(e) Calculate the sending end voltage if the line is supplying rated voltage and apparent power at 0.90 PF lagging.

(f) What is the voltage regulation of the transmission line for the conditions in (e)?

(g) What is the efficiency of the transmission line for the conditions in (e)?

Reference no: EM13967691

Questions Cloud

Who proposed the law of conservation of mass : Who proposed the law of conservation of mass. Who amended the original law of law of conservation of mass. How metal sodium reacts with a non metal. What is the law of constant composition or proportion.
Customer of adopting a business processes : Use the P&G example at the beginning of the chapter to explain the benefits to the customer of adopting a business processes perspective. Why might a traditional functional perspective have "blinded" P&G to the problems with the old system?
Business plan of amj-eco company : The Business Plan Of AMJ-Eco Company - AMJ Eco will be a company that is specializing in waste management in Saudi Arabia
Write down the business strategy of a firm : Is it enough to just write down the business strategy of a firm? Why or why not? Conversely, what are the limitations of not writing down the strategy, and instead depending on the firm's actions to define the strategy?
Calculate the abcd constants of this transmission line : Sketch the phasor diagram of this transmission line when the line is supplying rated voltage and apparent power at a 0.90 power factor lagging. Calculate the sending end voltage if the line is supplying rated voltage and apparent power at 0...
Who encodes the message in the smcr communication model : Who encodes the message in the SMCR communication model? When a message is interpreted by the receiver in the SMCR model, it means it has been.
Web sites for the professional organizations : Visit the Web sites for the professional organizations listed in the chapter. Who are their target audiences? Are some more focused on purchasing professionals, or logis- tics professionals? Which of the careers listed in these Web sites are menti..
Describe the security issues specific to cloud computing : Simply explain the concept of a database, making sure you delineate the difference between the organization of a relational database and a non relational database. Explain how encryption protects information and describe the security issues specific ..
What is sending end voltage and current of transmission line : The underground cable is now supplying 8 kV to an 800 kVA, 0.9 PF lagging single-phase load. What is the sending end voltage and current of this transmission line?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Why live streaming video require a heavy usage of bandwidth

describe with a numerical example the fundamental reason as to why live streaming video require a heavy usage of bandwidth as compared to live streaming audio. give a numerical example.

  Determine the equation representing the voltage wave

The flux through the window of a 20-turn coil varies with time in the following manner: flux=1.2 sin(28*t) Wb. Determine a) the frequency and rms value of the voltage generated in the coil, b) the equation representing the voltage wave.

  Write an expression for the frequency response of the sensor

Consider a thermal sensor that a time constant τ = 20 msec such that a step change in temp. requires approx. 3*τ to reach 95 % of the final value. a- write an expression for the frequency response of the sensor

  How the increased load will result in more flux weakening

Flux weakening causes problems in both generators and motors. In generators, the effect of flux weakening is simply to reduce the voltage supplied by the generator for any given load. In motors, the effect can be more serious.

  Design a combinational circuit that multiplies by 5 digits

Design a combinational circuit that multiplies by 5 an input decimal digit represented in BCD.The output is also in BCD. Show that the outputs can be obtained from the input lines without usingany logic gates?

  Determine what is the penetration depth of a microwave oven

The complex permittivity for bottom round steak is about epsilon = 40(1 - j0.3)*epsilon0(e0) at the operating frequency (2.5 GHz) of a microwave oven. What is the penetration depth

  Find the amount of work required for rearranging the charge

Find the amount of work required for rearranging a uniformly distributed surface charge Q of radius a into a uniformly distributed volume charge of radius a how can i do this problem in 2 different ways.

  Determine the order of the lowpass prototype function

A band filter has the following specs: Center frequency: 1500 Hz Bandwidth: 200Hz Chebyshev filter with a passband ripple of 1 dB 20-dB attenuation of te stopband gains at 1200 HZ and 1800 HZ. Determine the order of the lowpass prototype function.

  Find the impedance and resistance of a single-phase circuit

A single-phase circuit is placed across a 120-V rm, 60-Hz source, with an ammeter, a voltmeter, and a wattmeter connected. The instrucments indicate 12 A, 120 V, and 800 W, resppectively. Find (a) the power factor, (b) the phase angle

  The main mission of this project is to design and build a

the main mission of this project is to design and build a tap changer which is going to be fitted to power transformers

  Determine magnitude and direction of the velocity of skaters

Two skaters are moving towards each other on an ice rink. One skater (m1=45 kg) has a speed of 8.3 m/s towards the right. The other skater (m2=73 kg) has a speed of 4.8 m/s to the left. The skaters collide and grab on to each other.

  Determine the steady state probability matrix and note

A solar heating system can recharge (store heat) in a single sunny day enough to provide for the next two days. In otherwords, the only times that the solar heat must be augmented by someother heat source is when there are three of more consecutiv..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd