Calculate ratio of available energy and percentage increase

Assignment Help Electrical Engineering
Reference no: EM13251263

A standard 12-V car battery has an ampere-hour rating of 30 Ah, whereas a heavy-duty battery has rating of 51 Ah. Calculate the ratio of available energy and the percentage increase in available current for starting.

1-compare Eneregy =?

2-compare cranking current=?

Reference no: EM13251263

Questions Cloud

Find the electric field strength within the wire : A 2.45m long copper wire has 1.35V across its ends. Find the electric field strength within the wire
How many outcomes are in the sample space : Shuffle a deck of cards and pick two cards at random. Observe the sequence of the two cards in the order in which they were chosen. (a) How many outcomes are in the sample space
Determine the electron current in the wire : When a current flows in an aluminum wire of diameter 2.45 mm, the drift speed of the conduction electrons is 1.05 × 10-4 m/s. What is the electron current in the wire
Explain the initial pressure in the flask : Nitrogen trichloride, an unstable liquid, is placed in a 3.00 L container at 29ºC. The initial pressure in the flask is 1.00 atm due to the presence of air.
Calculate ratio of available energy and percentage increase : A standard 12-V car battery has an ampere-hour rating of 30 Ah, whereas a heavy-duty battery has rating of 51 Ah. Calculate the ratio of available energy and the percentage increase in available current for starting.
Determine the amplitude of the resulting motion : A mass-spring system with a natural frequency of 3.7 Hz is started in motion with an initial displacement from equilibrium of 5.5 cm, What is the amplitude of the resulting motion
State the molecular formula of the gas : A gaseous oxide of nitrogen has an empirical formula of NO2. A 0.556 g sample of this gas in a 250. mL container at 24ºC exerts a pressure of 44.8 cm Hg. What is the molecular weight of the gas? What is the molecular formula of the gas
Explain what is the energy change when the temperature : What is the energy change when the temperature of 14.4 grams of liquid mercury is decreased from 37.9 C to 24.4 C
Determine the weigh of the rod in units of pounds-force : A rod on the surface of Jupiter's moon Callisto has a volume of 0.3 cubic meters. Determine the weigh of the rod in units of pounds-force. The specific gravity is 4.7 gravitational acceleration on Callisto is 1.25 meters per second squared.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the binary value on the a-d output pins

An 8-bit A/D converter has Vref- = 2 V and Vref+ = 5 V. The analog input signal vin has a frequency range of 300 Hz to 3.4 kHz. a) If vin = 7 V, what is the binary value on the A/D output pins b) If vin = 1 V, what is the binary value on the A/D outp..

  Define design a synchronous counter using j-k flip-flops

Design of sync counter 0010 to 1101 using JK flip flops, Design a synchronous counter using J-K flip-flops that will count from 0010 to 1101 repetitively.

  What are implications of the second law of thermodynamics

Consider the best possible heat engine working in air at 25°C. The engine continuously converts heat from a source at 300°C to work, and heat is continuously transferred into the engine at a rate of 100 kJ/s.

  Determine the trigonometric fourier series coefficients

The exponential Fourier series coecients for a signal x(t) are: ak= { 1.57 when k=0, 0 when k is even and k doesnt equal 0, ((-1)(k-1)/2)/k when k is odd} Determine the following: (a) Plot the spectrum of the Fourier series.

  What is the generated fis editor in matlab

Develop with MATLAB, a fuzzy control system for controlling the power of a motor (0-350 rpm) based on the supported load (0-1700 lbs) thereby that at greater load develops more power. The system must contain at least 5 rules, but preferably 7.

  Find the magnitude of the net displaced charge

HCI is a polar molecule, with a dipole moment of 3.44 X 10^-30 [C.m] per molecule. If it is known that the molecular bond distance is 0.136[nm], find the magnitude of the net displaced charge in each molecule.

  Determine the power and torque developed by the motor

A dc series motor of 230 V, 12 hp, 1200 rpm is connected to a 230 V supply. It draws a current of 40 A, and rotates at 1200 rpm. Ra = 0.25 ohms and Rs = 0.1 ohms. Assume magnetic linearity.

  Estimate the irradiance on the pv module facing south

The global radiation at the solar noon on a summer solstice in Albuquerque, New Mexico (latitude 35° N) is 60mw/cm^2. Assume that (a) 30 % of this irradiance is diffuse radiation and (b) the ground surrounding a PV module is non-reflecting

  What are the impedances of an inductor and a capacitor

What are the impedances of an inductor and a capacitor (of any value) at a frequency of 0 Hz (DC) and at infinite frequency. Once we know what they are , how can this information help us in analyzing a circuit.

  At what point on the x-axis is the magnetic field zero

A long wire carrying a 5.0 A current perpendicular to the xy-plane intersects the x-axis at x = -2.0 cm. A second, parallel wire carrying a 3.0 A current intersects the x-axis at x = +2.0 cm.

  Calculate the rms value of the phase currents

A balanced three-phase inductive load is supplied in steady state by a balanced three-phase voltage source with a phase voltage of 120 V rms. The load draws a total of 10 kW at a power factor of 0.85. Calculate the rms value of the phase currents

  What is the complex admittance in siemens

An input signal of 10V at 0o is applied to a parallel RLC circuit with resistor R = 10 , inductive reactance XL = 20 , and a capacitive reactance XC = 10 . All three components are connected in parallel to the source.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd