Calculate amount of work done if all losses are neglected

Assignment Help Electrical Engineering
Reference no: EM13229374

A container with a plunger compresses one pound mole of an ideal gas from 1 atmospheres pressure to 10 atmospheres. Calculate the amount of work done if the process is considered to be polytropic. Assume the temperature to be 273K and the value of k for the process to be 1.4. All losses are neglected.

Reference no: EM13229374

Questions Cloud

Compute the cycle time and throughput rate : For each application type, compute the cycle time, throughput rate, and throughput efficiency - which process appears to be more efficient? Why do you think this is? What suggestions would you provide the manager for improvement? What are..
Determine the resistance of the filament : The resistance of the filament of the bulb, measured with a standard multimeter, is 16.7 ohms. When the bulb is connected into the circuit and is operating at the rated values given above determine a) the resistance of the filament b) the efficien..
Explain volume change after nano3 is dissolved : A buffer is prepared by dissolving .0250 mol of sodium nitrite in 500 ml of 0.0329 M nitrous acid. Assume no volume change after NaNO3 is dissolved. calculate the pH of this buffer.
With whom does your organization compete in terms : With whom does your organization compete in terms of compensation and benefits? What does your company policy say?
Calculate amount of work done if all losses are neglected : A container with a plunger compresses one pound mole of an ideal gas from 1 atmospheres pressure to 10 atmospheres. Calculate the amount of work done if the process is considered to be polytropic.
What will the new service probability be : Suppose the production manager is asked to reduce the safety stock of this item by 50%. If she does so, what will the new service probability be?Type your question here.
What additional annual cost is the shop incurring by staying : What additional annual cost is the shop incurring by staying with this order size?
Work breakdown structures : The teams then compared the resulting work breakdown structures and found that they were significantly different. Is only one of the work breakdown structures correct?
What are the pros and cons of great lakes coating : what are the pros and cons of great lakes coating's not having formalized policies regarding employees behavior?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Define a series circuit has a dc voltage source

A series circuit has a DC voltage source (56 volts), a resistor, (72 ohms), a capacitor (82 farads), and a switch. The capacitor is initially uncharged and the switch closes at t=0.

  Explain one signaling element is used to represent

Bandwidth, In a given communications system, one signaling element is used to represent 64 bits. The required data rate is 1.789 Mbps.

  Define the angle of departure is defined

The angle of departure is defined as 180 degrees plus the phase angle of GH computed at the complex pole, but ignoring the contribution of that particular pole.

  At what time t2 has 50 percent of the initial energy stored

A 190-F capacitance is initially charged to 1190V . At t = 0, it is connected to a 1-k resistance.  a) At what time t2 has 50 percent of the initial energy stored in the capacitance been dissipated in the resistance

  Determine data transfer for inputting and outputting data

Write an assembly language program that initialize data X to 0, and then when input device inputs data it is added to X and when output device asks for data the value of X is output. a) Use Programmed I/O Mode of data transfer for inputting and out..

  Find the ratio of the effective density of states

n the conduction band of a semiconductor, it has a lower valley at the center of the Bril- louin zone, and six upper valleys at the zone boundary along [100]. If the effective mass for the lower valley is 0.1m0 and that for the upper valleys

  How much work must be done to compress the section

An infinite grounded conducting tube of radius 10cm is centered on the z axis. A concentric charged tube of radius 6 cm has a surface charge density of 24 uC/m2. A 1m long section of the charged tube is compressed to change its radius to 3 cm.

  Design a binary counter capable of counting

The counter should increment on the rising edge of an input signal we'll call COUNT. Another input called CLEAR should have the effect of setting the counter to zero if CLEAR = 1 when COUNT is asserted.

  Examine of link budget dth qpsk satellite link

Analysis of link budget DTH QPSK Satellite link, A direct-to-home satellite television system uses a geostationary satellite in orbit above the equator at a longitude of 109 degrees west.

  Sketch the circuit schematic with flip-flops

A ripple carry adder is made of full adder cells each having 1 unit of combinational delay. To convert a four-bit ripple carry adder into a four stage pipeline adder proceed as following.

  Calculate the distance

Calculate the distance, D at which communication from the space craft will be lost again? Assume both antennas are ideal.

  Design a full-wave bridge rectifier to deliver

Design a full-wave bridge rectifier to deliver 12DC with less than 0.1V ripples into a load drawing 100mA. Specify any components as well as the input AC voltage required. Assume 0.6V diode drops.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd