Calculate a the energy of a 1150-kg car consumes if it is

Assignment Help Mechanical Engineering
Reference no: EM13624616

g=9.81 and pwater(water density)= 1000kg/m^3

1)Assuming there are both a pressure gage and a manometer attached to a gas tank which has a pressure lower than Patm. If the reading on the pressure gage is 10kPa and atmospheric pressure is 100kPa, determine (a) the absolute pressure of the tank, and (b) the height of the fluid between the two fluid levels in the manometer, given the fluid is has a specific gravity of 1.5.

2) Calculate (a) the energy of a 1150-kg car consumes if it is driving at a velocity of 20m/s and a 100 m-long uphill road with a slope of 10°; (b) the power is will require if the car is accelerating from 2m/s to 10m/s in 0.5s on a flat road. Disregard friction, air drag, and rolling resistance.

Reference no: EM13624616

Questions Cloud

The setup is such that pressure is proportional to volume p : a spring-loaded pistoncylinder assembly contains water at 500 c and 3 mpa. the setup is such that pressure is
A proton beam that carries a total current of 83 ma has 100 : a proton beam that carries a total current of 8.3 ma has 10.0 mm diameter. the current density in the proton beam
What percentage of gym memberships are first purchased in : forty percent of patrons at jays gym purchase year-long memberships and the rest purchase month-by-month memberships.
At the beginning of the compression stroke the volume of a : at the beginning of the compression stroke the volume of a certain diesel engine cylin-der is 1.000 liter and it is
Calculate a the energy of a 1150-kg car consumes if it is : g9.81 and pwaterwater density 1000kgm31assuming there are both a pressure gage and a manometer attached to a gas tank
The basic barometer can be used to measure the height of a : the basic barometer can be used to measure the height of a building.if the barometric pressure reading at the top and
The yellow light from a helium discharge tube has a : the yellow light from a helium discharge tube has a wavelength of 587.5 nm. when this light illuminates a certain
The average density of a fish can be found by first : the average density of a fish can be found by first weighing it in air and then finding the scale reading for the fish
The manager of a youth-oriented clothing store at the local : the manager of a youth-oriented clothing store at the local mall has determined that 27 of the males who enter the

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  If the friction mep is 122 bar in both cases determine the

a certain generating power plant requires 1 mw output. two types of diesel- engine installations are available. one

  10 c at the top and bottom surfaces respectively if the

the concrete slab of a basement is 11 m long 8 m wide and 0.20m thick. during the winter temperatures are nominally 17

  Calculate the mean velocity of the water

A new cast iron pipe is 5 km long and 15 mm diameter is used to convey water at a rate of 0.0150m3s-1. Given the absolute roughness of the pipe is 0.26 mm, density of water is 998 kg/m3 and dynamic viscosity of water is 1.14 × 10-3 kgm 1s-1.

  A paddle wheel within the cylinder is rotated until 15 kj

an insulated piston-cylinder device contains 100 l of air at 400 kpa and 25degc. a paddle wheel within the cylinder is

  Calculate the exact integration result using matlab

Calculate the exact integration result using Matlab symbolic tools and calculate the errors in calculating work done

  Find the maximum height h we can have if the environmental

water is syphoned from the container to a lower place. the flexible hose has a constant diameter and the location

  State what the joints are in the system

State what the joints are in the system and knowledge of computational kinematics explain what you believe is the procedure to calculate each variable.

  An ideal gas goes through an expansion process where the

helium gas expands from 125 kpa 350k and 0.25m3 to 100 kpa in a polytropic process with n 1.667 or 53. is the work

  A load of 275x106 g produces a 0327 cm diameter impression

a brinell hardness measurement is made on a nickel alloy using a 0.01 m diameter sphere of tungsten carbide. a load of

  Estimate the charge on the outside surface of a liposome of

liposomes are promising molecules in gene transfer technology because of their similarity to cell membranes and their

  Find the work delivered by the turbine per unit mass of

superheated water vapor enters and insulated turbine operating at steady state at 20 bar and 400 degc and exits at 1.5

  Boom ab is held in the position shown by three cables

boom ab is held in the position shown by three cables. knowing that the tensions in cables ac and ad are 4 kn and 5.2

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd