Balanced-cross-flow compact heat exchanger

Assignment Help Mechanical Engineering
Reference no: EM13708528

A balanced-cross-flow compact heat exchanger is required for an air heating system that processes 0.5 kg/s air. The inlet temperature for the hot water is 295 K, and the cold air enters at 270 K to be heated to 287 K. The inlet pressure for the hot water is 986 mbar. Determine the dimensions of the heat exchanger with a pressure drop of 3300 Pa.

Reference no: EM13708528

Questions Cloud

Find the drift speed of the electrons in the wire : An aluminum wire having a cross-sectional area equal to 5.00 x 10-6 m2 carries a current of 8.00 A. The density of aluminum is 2.70 g/cm3. Find the drift speed of the electrons in the wire
What is the radius of the circle : Three point charges, -6.2 x 10-9 C, -8.5 x 10-9 C, and +6.3 x 10-9 C, are fixed at different positions on a circle. What is the radius of the circle
What is the pressure at the inlet side of the pump : Centrifugal pump draws water (r=62.4 lbm/ft^3) at a rate of 1200 gpm, and 70 degrees F (Volute Pressure =.3631 psia) from a reservoir through a 4 in diameter pipe and delivers it to a 2 in diameter discharge pipe. The pump is located 10 ft above the ..
Obtain the potential difference across the capacitor : The electric potential energy stored in the capacitor of a defibrillator is 100 J, and the capacitance is 100 µ F. What is the potential difference across the capacitor
Balanced-cross-flow compact heat exchanger : A balanced-cross-flow compact heat exchanger is required for an air heating system that processes 0.5 kg/s air. The inlet temperature for the hot water is 295 K, and the cold air enters at 270 K to be heated to 287 K. The inlet pressure for the hot w..
What is the effective current associated : In the Bohr model of the hydrogen atom, an electron in the 6th excited state moves at a speed of 6.08 x104 m/s in a circular path having a radius of 1.90 x 10-9 m. What is the effective current associated with this orbiting electron
What net force is acting on the skier : A skier speeds down a smooth ski slope which is at an angle of 22° with the horizontal. What net force is acting on the skier
Size of the tank and the final pressure in the tank : An insulated rigid tank is divided into two equal parts initially by a partition. Initially, one part contains 5 kg of air at 800 kPa and 75° C and the other part is evacuated. The partition is now removed and the air expands into the entire tank. De..
What are the charges on the inner surfaces of the shell : A conducting spherical shell of inner radius a = 0.8 m and outer radius b = 1.0 m carries a charge of QC = -20 µC. What are the charges on the inner surfaces of the shell

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Draw a free body diagram of the spring cut near the point a

a coil spring is stretched by two equal and opposite forces f120n. the wire diameter is 5 mm and the mean coil diameter

  Calculate the highest velocity acceleration and jerk under

a cam is to be disinged for an automated part loader1 rise 50mm in 1.5 sec usisng the constant velocity motin scheme.2

  Air enters an insulated turbine operating at steady state

1 air in a piston-cylinder assembly and modeled as an ideal gas undergoes two internally reversible processes in series

  Consider an ideal combined cycle with compression ratio of

consider an ideal combined cycle with compression ratio of 71 in which air enters the compressor at 295 k enters the

  When he returns in the evening will his room be warmer or

on a hot summer day a student turns his fan on when he leaves his room in the morning. when he returns in the evening

  Steam enters an adiabatic turbine at 400c and 2mpa pressure

steam enters an adiabatic turbine at 400c and 2mpa pressure. the turbine has an isentropic efficiency of 0.9. the exit

  Eventually the contents of the tanks come to equilibrium at

two uninsulated rigid tanks contain air. initially tank a hold 1 lbm of air at 1440 degrees r and tank b has 2 lbm of

  A fan drawing electricity at a rate of 15 kw is located

a fan drawing electricity at a rate of 1.5 kw is located within a rigid enclosure measuring 3m x 4m x 5m. the enclosure

  The diffusion coefficients for carbon in nickel are 55 x

the diffusion coefficients for carbon in nickel are 5.5 x 10-14 m2s at 600 degc and 3.9 x 10-13 m2s at 700 degc

  The velocity of a particle along the s-axis

The velocity of a particle along the s-axis is given by v = 17s^3/2 where s is in millimetres and v is in millimetres per second. Determine the acceleration when s is 3.3 millimetres.

  Determine a the components of the force f exerted by the

a nozzle discharges a stream of water of cross-sectional area a with a velocity va. the stream is deected by a single

  A force is described as 150 lb acting through the origin

a force is described as 150 lb acting through the origin of a two dimensional coordinate system up at an angle 135ordm

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd