User Account

All Pages

As soon as the pressure in the bottle reached 100kpa the

Assignment Help Mechanical Engineering
Reference no: EM13638735

Consider an 8-L evacuated rigid bottle that is surrounded by the atmosphere at 100kPa and 17 degrees C. A valve at the neck of the bottle is now opened and the atmospheric air is allowed to flow into the bottle. As soon as the pressure in the bottle reached 100kPa the valve is closed. What is the temperature of the air that is in the bottle at the end of this filling process? (bottle is insulated)

Reference no: EM13638735

Questions Cloud

Both containers are filled initially to the same height of : two identical containers are open at the top and are connected at the bottom via a tube of negligible volume and a
Determine the pressure at the bottom of the tank and the : a closed tank contains a liquid sp. gr. 0.80 under pressue. the pressure guage depicted in figure p2.2.7 registers a
Show the sampling distribution of the mean amount of health : the latest available data showed health expenditures were 8086 per person in the united states or 17.6 of gross
Would it be possible to use non-metals and their ions to : the experiment utilized only metal-metal ion redoxcouples. is it possible to determine the srp for non-metalsand their
As soon as the pressure in the bottle reached 100kpa the : consider an 8-l evacuated rigid bottle that is surrounded by the atmosphere at 100kpa and 17 degrees c. a valve at the
A solution of 85g of a unknown organic compound in 100g : a solution of .85g of a unknown organic compound in 100g ofbenzene has a freezing point of -5.16c. what is the molality
Gaseous h2te is made with te-132 when the tellurium isotope : the half life of te-132 is 3.26 days. this isotopedecays by beta emission to a highly unstable intermediate that decays
What is a point estimate of the difference between mean : annual per capita consumption of milk is 21.6 gallons statistical abstract of the united states 2006. being from the
Two equal point charges each of magnitude 200 x 10-6 c are : two equal point charges each of magnitude 2.00 x 10-6 c are located on the x axis one at x 1.00m the other at x

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the power required in hp to heat the house using

a building for which the heat transfer rate through the walls and roof is 1350 btuh per degree temperature difference

  A copper specimen is cold worked at room temperature and

a copper specimen is cold worked at room temperature and annealed at 100-400c. draw schematic sketches showing how

  Calculate the head of the crest of the model for the maximum

An ogee spillway of a gravity dam is to be modeled using water. The spillway section is 40 feet high, its crest length is 60 feet and the maximum discharge is 3,000 CFS when the head on the crest of the spillway is 5 feet. Using a model scale of 1:10..

  Determine the rate of air flow for the 80 f stream in lbhr

two moist air streams flow into a modified cooling tower to cool liquid water from 120 f to 75 f. the first moist air

  A certain superinsulation material having a thermal

a certain superinsulation material having a thermal conductivity of 2 x 10-4 wm.c is used to isulate a tank of liquid

  The steam exits the turbine at a pressure of 40 kpa and a

a steam turbine has an inlet pressure of 1200 kpa and temperature of 400 degc. the steam exits the turbine at a

  If the material has a yield strength of sy 40 kpsi find

a shaft is a circular cross sectional with diameter of 1.5 is subjected to loading of bending mz 5000 lb-in and a

  Calculate the power required to drive the plant

A refrigerating plant operating between temprature limit of 253k and 307k provides 4.5kJ/s of refrigerating effect. If the refrigerating efficiency of the plant is 0.76. calculate the power required to drive the plant.

  In each case locate the state on sketches of the t-v and

in each case locate the state on sketches of the t-v and p-v diagrams.a four kg of water at 100c fill a closed

  The initial temperature of the calorimeter is 201 degrees

in the following experiment a constant-pressure calorimeter containing 100 ml of h20 is used.the initial temperature of

  The inlet to a nitrogen compressor is a pipe of 5cm

the inlet to a nitrogen compressor is a pipe of 5cm internal diameter its outlet is a pipe of 2 cm internal diameter.

  If the temperature measurement can be made within 1 degree

a pressurized tank is nominally at 205 degree c. the density determination must be within 0.5 to be useful. if the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd