User Account

All Pages

Argon gas enters an adiabatic compressor under steady flow

Assignment Help Mechanical Engineering
Reference no: EM13345598

Argon gas enters an adiabatic compressor under steady flow conditions at 12o kpa and 30 C with a velocity of 20 m/s and exits at 1.2 Mpa, 530 C and 80 m/s. The inlet area is 130m^2. Assuming the surroundings to be at 25 C, determine The reversible power input in kW and the entropy generation in Kw/k and irreversibility in kW.

Reference no: EM13345598

Questions Cloud

Consider a coil which has a resistance of 0314omega and : consider a coil which has a resistance of 0.314omega and an inductance of 0.002 h being supplied by 240 vrms 50 hz ac
To obtain ksp for pbi2 we must calculate pb2 in each : from the experimental data we obtain i- directly. to obtain ksp for pbi2 we must calculate pb2 in each equilibrium
Calculate the molar concentration of oh - ions in an 137 m : calculate the molar concentration of oh - ions in an 1.37 m solution of hypobromite ion bro- kb 4.0
A 350 g sample of solid mgoh2 was treated with 500 ml of : a 3.50 g sample of solid mgoh2 was treated with 50.0 ml of 0.500 m h2so4aq. after the reaction was over some of the
Argon gas enters an adiabatic compressor under steady flow : argon gas enters an adiabatic compressor under steady flow conditions at 12o kpa and 30 c with a velocity of 20 ms and
Please comment on the mineralogy chemistry and origin of : please comment on the mineralogy chemistry and origin of alkaline igneous rocks with illustrated examples.unlimited
How does intels architecture differ from mipsfour processor : 1.how does intels architecture differ from mips? 2. four processor examples of the above1 3.differences between the
How many moles of dinitrogen tichloride correspond to 645 : how many moles of dinitrogen tichloride correspond to 645 mg of dinitrogen trichloride? how many nitrogen atoms would
How many ml of water at 23degrees celsius with a density of : how many ml of water at 23degrees celsius with a density of 1.00gml must be mixed with 180mlabout 6oz of coffee at 95

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Explain how can be determined the dynamic parameters

How can be determined the dynamic parameters of a second order system, wiht an Inertia (M), a dampening coeficient ( C ) and a Stiffness constant ( K).

  Temperature and density of air for an adiabatic process

Effect of pressure on temperature and density of air for an adiabatic process, The pressure is to be raised from atmospheric to 7 psi (4.83 bar). The process is adiabatic, and the volume is constant and unknown.

  Explain mean effective pressure of a diesel engine

Volumetric Compression Ration and Mean Effective Pressure of a Diesel Engine, A diesel engine has air before compression at 280 K and 85 Kpa. The highest temperature is 2219 K and the highest pressure is 6 MPa.

  Determine the magnitude of its acceleration

The car travels up the hill with a speed of v = (0.4s) m/s, where s is in meters, measured from A. Determine the magnitude of its acceleration when it is at point s = 50 m, where p = 500 m.

  How penalty method is applied on a one dimensional

how penalty method is applied on a one dimensional heat equation in Meshless method.

  At what location s will the combined moment of the weights

At what location S will the combined moment of the weights of the man and platform about point B be zero?

  What are the magnitude of f2 and f3

The magnitude of the horizontal(to the right) for F1 is 5kN and F1 + F2 + F3 = 0. What are the magnitude of F2 and F3?

  An airfoil of surface area 1ft squared is tested for lift

Lift coefficient (Cl) and lift (L), An airfoil of surface area 1ft squared is tested for lift (L) in a wind tunnel. At an angle of attack of 5 degrees with standard air of density 0.0024 slugs/ft cube at a speed of 100 ft/sec

  Use lagranges equations to derive the eom

Use Lagrange"s equations to derive the EOM for the system. You have a function L of some What are Lagrange"s Equations?

  Calculate the work transferred from the surroundings

Define your system to be the gas in the cylinder, and calculate the work transferred from the surroundings to the system from this expansion. Note that the pressure will change as the expansion takes place.

  What is effect of modeling a plane stress as plane strain

IN FE analysis, What is effect of modeling a plane stress as plane strain and vice a versa?

  Estimate the required hp to operate the compressor

An air compressor takes air from outdoors at 28deg C and 101.2kPa and compresses it to 790kPa and 50 deg C. The air input to the compressor is found to be 22.67m3/hr. Estimate the required Hp to operate the compressor.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd