An engine of mass 180 kg is to be supported on four helical

Assignment Help Mechanical Engineering

Reference no: EM13632737

An engine of mass 180 kg is to be supported on four helical springs. When the engine speed is 900 rpm, there is a primary vertical periodic disturbing force of maximum value 300 N due to the unbalanced reciprocating weights. The engine vibrates in the vertical direction with no horizontal or angular movement is assumed.

i) Find the stiffness of each spring to limit the maximum total periodic force on the foundations to 20 N.

ii) What will be the amplitude of vibration of the engine when its speed is 600 rpm ?

Reference no: EM13632737

Questions Cloud

A tuning fork vibrates at a frequency of 256 hz what is the : a tuning fork vibrates at a frequency of 256 hz. what is the wavelength of the sound coming from the fork when the air

Calculate the amplitude of the oscillation which may be : a steel disc 300 mm diameter of mass 29kg is suspended from the end of a wire 2.5 mm diameter and 1.5 m long which is

The combined mass is shot horizontally off the cliff with : the following takes place at a colony on the moon some time in the distant futurea 40 kg cannon is loaded with a 10 kg

Sketch mohrs circle for this state of stress and determine : the principal stresses at a given point are sigma1 10 mpa sigma2 ?100 mpa. sketch mohrs circle for this state of

An engine of mass 180 kg is to be supported on four helical : an engine of mass 180 kg is to be supported on four helical springs. when the engine speed is 900 rpm there is a

A research engineer for a tire manufacturer is : a research engineer for a tire manufacturer is investigating tire life for a new rubber compound and has built 16 tires

A mass of 55 kg is suspended from a spring of stiffness 835 : a mass of 55 kg is suspended from a spring of stiffness 83.5 kgcm. a dash pot is fitted and it is found that the

Calculate the ratio of the etched and original crack tip : the fracture strength of glass may be increased by etching away a thin surface layer. it is believed that the etching

The shear stresses on planes perpendicular to the y-axis : an element of a material experiences stresses sigmaz ?20 mpa sigmax 40 mpa tauexz 40 mpa sigmay 80mpa. the shear

User Account

All Pages