An air-standard otto cycle has a compression ratio

Assignment Help Mechanical Engineering

Reference no: EM13718458

An air-standard Otto cycle has a compression ratio of 6. At the beginning of compression, the pressure is 100 kPa and the temperature is 300 K. During the heating process, the temperature is raised to 2500 K. Assume that the cold air-standard assumption applies and determine:

a) the heat added (in kJ/kg)

b) the net work (in kJ/kg)

c) the thermal efficiency of the cycle

d) the mean effective pressure (in kPa)

Reference no: EM13718458

Questions Cloud

Either brittle fracture or fully plastic yielding is require : A tension member made of 2014-T651 aluminium has a dimensions of b= 30 and t=4mm. A safety factor of 3.0 against failure by either brittle fracture or fully plastic yielding is required.

Despite the higher expense of three-way valves : Under what circumstances three-way control valves would be used rather than two-way control valves, despite the higher expense of three-way valves?

Assume that the cold air standard assumptions applies : The pressure and temperature at the beginning of compression in a Diesel cycle are 100 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 5 MPa and the temperature is 2500 K.

Calculate the specific compressor and turbine work : A simple ideal Brayton cycle has a pressure ratio of 6. The working fluid enters the compressor at a pressure of 100 kPa and a temperature of 300 K. The temperature at the end of the combustion process is 1273 K. applying the cold air-standard assump..

An air-standard otto cycle has a compression ratio : An air-standard Otto cycle has a compression ratio of 6. At the beginning of compression, the pressure is 100 kPa and the temperature is 300 K. During the heating process, the temperature is raised to 2500 K. Assume that the cold air-standard assumpt..

Determine the flow rate of oil through the pipe : Oil at 80°F, density r = 56.8 lbm/ft3 and viscosity m = 0.0278lbm/ft.s is flowing steadily in a 0.5in diameter 120ft long pipe. The pressure at the pipe inlet is 120 psi and at the outlet is 14 psi. Determine the flow rate of oil through the pipe ass..

Global climate change scientist predict earths atmospheric : Due to global climate change scientist predict the earth’s atmospheric temperature will increase as much as 8°F in the next 100 years. Estimate the overall energy increase [kJ] in the atmosphere this temperature rise will cause. Consider the thicknes..

Specific heat at saturation of a liquid phase of mass : Show that the specific heat at saturation of a liquid phase of mass m (defined by Cf= (deltaQ/m)dt is generally not the same as the specific heat at constant pressure of the saturated liquid.

Stress equals youngs modulus times strain : Hookes Law (Stress equals Young’s Modulus times Strain; or s=Ee) is valid for both linear tensile behaviour and torsion (or shear) as well (e.g. t=Gg). Imagine a shear test of annealed, mild steel (e.g. AISI 1020). It is sheared until it just starts ..

User Account

All Pages