Air from a workspace enters the air conditioner

Assignment Help Mechanical Engineering

Reference no: EM13703053

Air from a workspace enters the air conditioner unit at 30C dry bulb and 20C wet bulb. The air leaves the air conditioner and returns to the space at 20C dry bulb and 6.5C dew point temperature. If there is any, the condensate leaves the air conditioner at the temperature of the air leaving the cooling coils. The volume flow rate of the air returned to the workspace is 600 m3/min. Atmospheric pressure is 101 kPa. Compute the heat transfer rate from the air in kW, and the mass flow rate of the condensate water, if any, in kg/h.

Reference no: EM13703053

Questions Cloud

Element at the inside surface of the pressure vessel : A cylindrical pressure vessel of 120 in diameter outside, used for processing rubber, is 36 ft. long. If the cylinder portion of the vessel operates at 120 psi internal pressure, what are the stresses acting on an element at the inside surface of the..

Determine the moment around the front axel m-while thrusting : The rocket car below is thrusting so that at constant thrust (force) , it reaches a velocity of 500 km/hr in 30 seconds. How much thrust is this (kN)? Determine the moment around the front axel M, while thrusting.

Find the tension in the towrope at this speed : An accelerating car develops 15 kW at a speed of 30 km/h on a level roadway, when towing an identical vehicle whose engine is out of action. Find the tension in the towrope at this speed, if each car has a constant attractive resistance of 650 N

Kinetic and potential energy effects are negligible : Liquid octane (C8H18) at 77F, 1 atm enters a combustion chamber operating at steady state and burns completely with 50% excess dry air entering at 120F, 1 atm. The products exit at 1060F, 1 atm. Determine the rate of heat transfer between combustion ..

Air from a workspace enters the air conditioner : Air from a workspace enters the air conditioner unit at 30C dry bulb and 20C wet bulb. The air leaves the air conditioner and returns to the space at 20C dry bulb and 6.5C dew point temperature. If there is any, the condensate leaves the air conditio..

Determine the density of refrigerant : Determine the density of Refrigerant-12 at 3MPA and 200 degrees celcius by using the principle of corresponding states.

Determine net radioactive heat transfer from each surface : A cylindrical furnace is 0.4 m long and 0.4 m in diameter. The two ends are maintained at 600 K and 700 K with emissivities of 0.6 and 0.7 respectively. The lateral surface has an emissivity of 0.8 and a temperature of 800 K. Determine the net radioa..

Minimum wall thickness of pole after incorporating factor : Erected a new sign welcoming people to the campus. The sign is painted on a rectangle of graphite reinforced epoxy which will not bend and measures 3 ft high and 5 ft wide. This sign is fastened along its 3 ft side to a hollow 2014-T6 aluminium (allo..

Air standard diesel cycle has a compression ratio : An air standard Diesel cycle has a compression ratio of 15, and the heat transferred to the working fluid per cycle is 800 Btu/lbm. At the beginning of the compression process the pressure is 14.7 lb/in^2 and the temperature is 60 F. Determine the pr..

User Account

All Pages