User Account

All Pages

Air at 80 kpa 300 k and 250 ms enters a diffuser at a rate

Assignment Help Mechanical Engineering
Reference no: EM13611734

Air at 80 kPa, 300 K, and 250 m/s enters a diffuser at a rate of 2.5 kg/s and leaves at 315 K. The exit area of the diffuser is 400 cm^2. As it passes through the diffuser, the air loses heat at a rate of 12 kJ/s.

Calculate the exit velocity (151 m/s)

Calculate the exit pressure (37.3 kPa)

Reference no: EM13611734

Questions Cloud

A cardboard poster containing 32 in2 of printed region is : a cardboard poster containing 32 in2 of printed region is to have a margin of 2 in at top and the bottom and 43in at
Liquid water is cooled at a constant pressure of 200 kpa in : liquid water is cooled at a constant pressure of 200 kpa in a piston-cylinder device from a temperature of 110 degc to
Two lamps are of intensities 40 and 5 candle power : two lamps are of intensities 40 and 5 candle power respectively and are 6m apart. if the intensity of illumination i at
An open box is to be made by cutting a square from each : an open box is to be made by cutting a square from each corner of a 12cm by 12cm piece of metal and then folding up the
Air at 80 kpa 300 k and 250 ms enters a diffuser at a rate : air at 80 kpa 300 k and 250 ms enters a diffuser at a rate of 2.5 kgs and leaves at 315 k. the exit area of the
If the spacing between the plates in capacitor 1 is d what : suppose two parallel-plate capacitors have the same charge q but the area of capacitor 1 is a and the area of capacitor
A cylindrical-shaped tin can is to have a capcity of 1000cm : a cylindrical-shaped tin can is to have a capcity of 1000cm. find the dimensions of the can that require the minimum
Delphi companyreduced its other post reitrement benefits by : delphi companyreduced its other post reitrement benefits by approx 500 millionbecause of a change in the law. the
If the standard deviation for the number of televisions in : an april 2004 article stated that americans have an average of 2.11 televisions per household. if the standard

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Air enters a one-inlet one-exit control volume at 6 bar 500

air enters a one-inlet one-exit control volume at 6 bar 500 k and 30 ms through a flow area of 28 cm2. at the exit the

  Calculate the overall efficiency the heat rate mw and the

calculate the overall efficiency the heat rate mw and the total fuel rate kgs of a combined-cycle power plant 1 if no

  Diffusion coeffiecient and calculate constant

Diffusion Coeffiecient, Calculate Constant, The diffusion coeffiecient for Cr^+3 in Cr2O3 is 6x10^-15 cm2/s at 727 degrees Celcius and is 1x10^-9 cm2/s at 1400 degrees Celcius.

  Explain coefficient reaction

Coefficient Reaction, The removal efficiency of a reactor tank is 73-percent and its residence time is 28.5s

  A cyclic steam power plant is to be designed for a steam

a cyclic steam power plant is to be designed for a steam temperature at turbine inlet of 360 celsius and an exhaust

  Determine the net electric output

Water enters a hydraulic turbine through a 30-cm-dia pipe. The pressure drop in the turbine is measured by a mercury manometer to be 1.2 m. For a combined turbine-generator efficiency of 83%, determine the net electric output. Disregard the effect..

  Explain mechanical vibrations in a steel beam

Twenty-five samples of steel beam were chosen and tested for Young's Modulus. Eight had a modulus of E = 30 x 10^6 psi. Two had a modulus of E = 29 x 10^6 psi. Fifteen had a modulus of E = 30. x 1-^6 psi.

  Name any incongruent melting intermediate compound

(i) Name any incongruent melting intermediate compound(s) present. (j) Locate and draw a square around all congruent melting equilibria. (k) Label all the two-phase fields. (l) Is either Ti or Ni allotropic?

  Determine the entropy generation and the work transfer to

a closed rigid stationary and adiabatic pressure vessel initially contains two-phase h2o at a pressure of 175 kpa and a

  Calculate the work done by the gas during these

one mole of an ideal gas at t 25 degc is held in a cylinder by a piston at a pressure of 1 x 107 n m-2. the piston

  Calculate how much payload this assembly

The nominal breaking strength of the rope is 10,000 lbs. Calculate how much payload this assembly can allowably pick up. Show your work.

  Determine the magnitude of the acceleration at the instant

to analyze the motion of a body that is traveling along a curved path to determine the bodys acceleration velocity and

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd