User Account

All Pages

Air at 1175 k 8 bar enters a turbine operating at steady

Assignment Help Mechanical Engineering
Reference no: EM13628504

Air at 1175 K, 8 bar enters a turbine operating at steady state and expands adiabatically to 1 bar. The isentropic turbine efficiency is 92%. Employing the ideal gas model with k=1.4 for the air, determine (a) the work developed by the turbine, in kJ per kg of air flowing, and (b) the temperature at the exit, in K. Ignore kinetic and potential energy effects.

Reference no: EM13628504

Questions Cloud

The following wind conditions are expected v 10 i - 5 j : from time t0 to t5 hr radioactive steam is released from a nuclear power plant located at x -1 mile and y 3 miles.
Consider a neutron star whose mass is twice the mass of the : the weight of a star is usually balanced by two forces the gravitational force acting inward and the force created by
Amonia as a refrigerant enters the expansion valve at a : amonia as a refrigerant enters the expansion valve at a pressure of 1.5 mpa and a temperature of 32 oc its pressure on
The water discharges are 25 cfs to the left 5 cfs to the : for this wye fitting which lies in a horizontal plane the cross-sectional areas at sections 1 2 and 3 are 1 ft2 1 ft2
Air at 1175 k 8 bar enters a turbine operating at steady : air at 1175 k 8 bar enters a turbine operating at steady state and expands adiabatically to 1 bar. the isentropic
The numerical value of the angular velocity of rotation of : the numerical value of the angular velocity of rotation of the earth should be rads in order to make the effective
The mean annual salary of public classroom teachers is : the mean annual salary of public classroom teachers is 49000. assume the standard deviation is 9200. do the following
The exiting flow which is completely mixed is at 50 degree : air at 40 degree c and 1 atm at volumetric flow rate of 1.5 m3s is joined with co2 at 120 degree c and 1 atm in pipe
If the power input is 2150 hp determine for the compressor : saturated water vapor at 300 degrees f enters a compressor operating at steady state with a mass flow rate of 5 lbs and

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The specimen failed due to stress rupture after 100 hours

a new high- temperautre alloy is to be used for a 3-mm diameter tensile support member for an impact-sensistive

  There is no friction and the tension in the cord is just

two identical cylinders c1 and c2 each of radius r and weight p are tied together by a cord. they support a third

  Calculate the force required in direct extrusion

Calculate the force required in direct extrusion of 1100-O aluminum from a diameter of 6 in. to 2 in. Assume that the redundant work is 30% of the ideal work of deformation, and the friction work is 25% of the total work of deformation.

  At the end of a sunny stretch the glauber salt is all

a passive solar house requires an average heating power of 8.4 kw in the winter. it stores energy in 10 tonnes 10000kg

  A smoke stream from a smoke generating tube is often used

a smoke stream from a smoke generating tube is often used as a simple method of flow visualization in wind tunnels.

  Steam enters at 300c and exits as liquid water at 90c while

a stream of methanol vapor is used to chill a countercurrently flowing saturated steam in an adiabatic heat exchanger.

  Determine the vertical component of the reaction at the

the compound beam is fixed at a and supported by a rocker at b and c. there are hinges pins at d and e. take f 14kn.

  Determine the acceleration of the block

block c starts from rest and moves downward with a constant acceleration. knowing that after 5 s the velocity of block a relative to block d is 8 ft/s, determine a) the acceleration of the block c. b) the acceleration of portion e of the cable.

  Neglect the small mass and friction of the pulley and

the system is released from rest with the cable taut. neglect the small mass and friction of the pulley and calculate

  A force of 100 lbf at -30 degrees to the right of the

a mass of 100 slug is towed by 2 ropes one rope pulls with a force of 200 lbf at 30 degrees to the left of the centar

  Determine the thermal efficiency and the required steam

determine the thermal efficiency and the required steam flow rate kgs for a reheat-regenerative steam power plant which

  What is the mass of the piston if the gas pressure inside

a gas is contained in a vertical cylinder fitted with a piston. atmospheric pressure outside is 1 bar and the piston

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd