After drawing a neat and clear schematic of the geometry

Assignment Help Mechanical Engineering
Reference no: EM13617783

A 5 ft^3 tank containing steam at 14.7 psia, 1% quality, is fitted with a relief valve. Heat is transferred to the tank from a large heat source at 500 F. When the pressure in the tank reaches 300 psia, the relief valve opens, and saturated vapor at 300 psia is throttled across the valve and discharged at 14.7 psia pressure. This process continues until the quality in the tank reaches 90%. After drawing a neat and clear schematic of the geometry with appropriate conditions,

a. Calculate the mass discharged from the tank.

b. Determine the heat transfer to the tank during the process.

Reference no: EM13617783

Questions Cloud

The field-circuit resistance and armature-circuit : the field-circuit resistance and armature-circuit resistance of a 10-hp 115-v motor are 90 ohms and 0.08 ohms
An electron has a kinetic energy of 280 x 10-17 j it moves : an electron has a kinetic energy of 2.80 x 10-17 j. it moves on a circular path that is perpendicular to a uniform
A 25-hp 240-v 778-a shunt motor has an armature resstence : a 25-hp 240-v 77.8-a shunt motor has an armature resstence of 0.083 ohms and a field-circuit resistance of 125 ohms.
Crown cinema recently increased the price of a movie ticket : crown cinema recently increased the price of a movie ticket by 5. as a result attendance dropped by 8. based on this
After drawing a neat and clear schematic of the geometry : a 5 ft3 tank containing steam at 14.7 psia 1 quality is fitted with a relief valve. heat is transferred to the tank
The housekeeping services department of abc hospital had : the housekeeping services department of abc hospital had 250000 in direct costs during 2006. these costs must be
Determine the temperatures of surface 1 through 4 of the : determine the temperatures of surface 1 through 4 of the furnace cavity of example 13.3 if the entire furnace
An electron moves in a circular path perpendicular to a : an electron moves in a circular path perpendicular to a magnetic field of magnitude 0.255 t. if the kinetic energy of
Bay pines medical center estimates that a capitated : bay pines medical center estimates that a capitated population of 50000 would utilize 440 inpatient days per 1000

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the temperatures of surface 1 through 4 of the

determine the temperatures of surface 1 through 4 of the furnace cavity of example 13.3 if the entire furnace

  The surface of the sea

An iceberg with specific gravity (SGice) of 0.92 is partially submerged in seawater whose specific gravity is SGw= 1.025. Determine the relative volume of the iceberg that appears above the surface of the sea.

  What is the maximum mass that can be hung on the end of the

for a 6061 t-6 aluminum beam with dimensions b 3.0 cm d 0.5 cm and length a 30 cm a what is the maximum mass that

  This nuclide is produced by the endoergic reaction 16onp16n

an important radionuclide produced in water-cooled nuclear reactors is 16n which has a half-life of 7.13 s and emits

  At what true event rate will dead time losses not to be

counters a and b are non-paralyzable with dead times of 30 or 100 microseconds respectively. at what true event rate

  Design 2-shell pass and 8-tube pass heat exchanger for

design 2-shell pass and 8-tube pass heat exchanger for heating ethyl alcohol from 25degc to 70degc at a rate of 2.9

  Assuming the ideal gas model for the co2 determine the

carbon dioxide co2 contained in a piston-cylinder arrangement initially at 87 psia and 720 r undergoes an expansion to

  Determine the phase or phases in a system consisting of h2o

determine the phase or phases in a system consisting of h2o at the following conditions and sketch both the p-v and t-v

  If an air parcel at the surface was heated to 65 degree f

the measured lapse rate at a given location was 3.8 degree f per 1000 ft and the surface temperature was 60 degree f.

  A 120 mm diameter hole is punched in the center of the

a steel plate with dimensions shown below is subjected to 150 kn tensile force and 300 n-m bending moment. the plate is

  Use the newton-raphson method to solve for cumulative

use the newton-raphson method to solve for cumulative infiltration ft using the green-ampt equation for a sandy loam

  Determine the tension in the cable

the frame ACD is supported by a ball-and-socket joint at A and D and by a cable which passes through a ring at B and is attached to hooks at G and H. Knowing that the frame supports at point C a load of magnitude P=268N, determine the tension in t..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd