User Account

All Pages

After a period of time the pressure in the tank rises to 15

Assignment Help Mechanical Engineering
Reference no: EM13618069

Initially, an insulated rigid tank contains 3.73 kg of water at 240oC and 1 MPa. A heater in the wall of the tank maintains the wall temperature at 600oC. After a period of time, the pressure in the tank rises to 1.5 MPa. Determine the final volume (m3) of the water in the tank. Assume variable specific heats (use the property tables for water).

Reference no: EM13618069

Questions Cloud

A fully charged 71uf capacitor is connected in series with : a fully charged 7.1uf capacitor is connected in series with a 2.0times105 omega resistor. what percentage of the
In an inertia welding experiment a sample of 50 welds were : in an inertia welding experiment a sample of 50 welds were tested. the sample mean and sample standard deviation of the
A series combination of four identical resistors is across : a series combination of four identical resistors is across a battery. the potential difference across each resistor is
Express your answer using two significant figures yearly : a typical cost for electric power is 12.0 per kilowatt-hour. a some people leave their porch light on all the time.
After a period of time the pressure in the tank rises to 15 : initially an insulated rigid tank contains 3.73 kg of water at 240oc and 1 mpa. a heater in the wall of the tank
During a 78-ms interval a change in the current in a : during a 78-ms interval a change in the current in a primary coil occurs. this change leads to the appearance of a
A rectangular loop of wire that is 55 cm wide and 20 cm : a rectangular loop of wire that is 55 cm wide and 20 cm long is placed in a region where the magnetic field is b 0.4
A sample of ideal gas with gamma factor 14 occupies a : a sample of ideal gas with gamma factor 1.4 occupies a volume of 1.5 l. the gas undergoes an isochoric heating raising
Determine the pipe diameter considering that concrete pipe : a water line is planned to connect a new reservoir to an existing water treatment plant. the average water surface

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Calculate the work transferred from the surroundings

Define your system to be the gas in the cylinder, and calculate the work transferred from the surroundings to the system from this expansion. Note that the pressure will change as the expansion takes place.

  Find stall speed

Find Stall Speed (KEAS) at 1 G, 0 deg AOB and find Stall Speed (KEAS), level flight 70 deg AOB (2.9 G)

  Determine the absolute maximum bending stress in the beam

If the beam has square cross section of 9 in., on each side, determine the absolute maximum bending stress in the beam.

  Determine the final temperature of the air in the cylinder

a frictionless piston-cylinder device fitted with stops above the piston contains 1.2 kg of air at 200degc and 700 kpa.

  The radius of the curvature of the path of the car at b is

a 1500-kg car enter an s-curve at a with a speed of 96 kmh with brakes applied to reduce the speed to 72 kmh at a

  It is now expanded to a final pressure of 50pa during this

a mass of 3kg of nitrogen at 100kpa and 20oc is contained in a piston-cylinder device. it is now expanded to a final

  The barometer reads 2973 inches hg and the stagnation

a pitot static tube records a static pressure of 5.20 psig and a difference between impact pressure and static pressure

  Steam at 160 bar 480degc enters a two-stage turbine

steam at 160 bar 480degc enters a two-stage turbine operating at steady sate with a volumetricnbspflow rate of 800

  Determine the final density and temperature of the gas

natural gas at 70 f and standard atmospheric pressure of 14.7 psi is compressed isentropically to a new absolute

  What is the quality in the steam

Saturated liquid-vapor mixture of water, called wet steam, in a steam line at 2000 kPa is throttled to 100 kPa and 120?C. What is the quality in the steam .

  A molten mixture of salt nano3-kno3 is used as the heat

a molten mixture of salt nano3-kno3 is used as the heat transfer fluid for application in a parabolic trough solar

  What are the percentages of the total heat absorption

What are the percentages of the total heat absorption taking place in the economizer, boiler drum and the superheater, respectively? Assume cp of air and water as 1.005 kJ/kg K and 4.2 kJ/kg K, respectively.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd