A tank of 05 m3 volume contains compressed air a valve is

Assignment Help Mechanical Engineering
Reference no: EM13628107

A tank of 0.5 m^3 volume contains compressed air. A valve is opened and air escapes with a velocity of 300 m/s through an opening of 130 mm^2 area. Air temperature passing through the opening is -15ºC and the absolute pressure is 350 kPa. Find the rate of change of density of the air in the tank at this moment.

Reference no: EM13628107

Questions Cloud

A commercially available sump pump is capable of : a commercially available sump pump is capable of deliver-ing 2800 gallons per hour of water through a vertical lift of
If the temperature of section 1 is 143 celcius and section : a well insulated rigid container stores a gas cv 0.387 kjkg k in two sections at different temperatures. section 1 has
A 150 hp diesel engine for running an emergency generator : a 150 hp diesel engine for running an emergency generator in a building ha sa compression ratio of 19 with a cutoff
Determine the speed of sound waves in water and find the : a ship uses a sonar system to detect underwater objects. the sonar system emits underwater sound waves and measures the
A tank of 05 m3 volume contains compressed air a valve is : a tank of 0.5 m3 volume contains compressed air. a valve is opened and air escapes with a velocity of 300 ms through an
A sinusoidal wave with an amplitude of 15 cm and a : a sinusoidal wave with an amplitude of 1.5 cm and a frequency of 100 hz travels at 200 ms in the positive x-direction.
A representative of a consumer advocate group wishes to see : bags of a certain brand of tortilla chips claim to have a net weight of 16 ounces. net weights actually vary slightly
A study reports the results of a regression analysis based : a study reports the results of a regression analysis based on n15 observations in which x filter application
If the clocks driving spring is allowed to run down damping : the pendulum in a grandfather clock has a period of 1.00 sec? if the clocks driving spring is allowed to run down

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Air enters the compressor of a gas turbine at 100 kpa 300 k

air enters the compressor of a gas turbine at 100 kpa 300 k and a volumetric flow rate of 5.0 m3s. the air is

  Find the turbine isentropic efficiency

Find the turbine's (b) isentropic efficiency (%), (c) reversible work (kJ/kg), (d) irreversibility(kJ/kg), and (e) exergy destruction (kJ/kg). (f) Draw a T-s diagram of the process

  Determine the smallest horizontal force required

Determine the smallest horizontal force required to lift the 260- crate. The coefficient of static friction at all contacting surfaces is = 0.7. Neglect the mass of the wedge.

  Calculate the fraction of the water that condenses and the

air at 80 degrees fahrenheit and 80 percent relative humidity is cooled to 51 degrees fahrenheit at a constant pressure

  Calculate the reynolds number for water dynamic viscosity

calculate the reynolds number for water dynamic viscosity of 7.98 10-4 nsm2 flowing through a rectangular pipe 4 cm

  Its blowout -preventer system has failed so thousands of

a deep-water oil rig has just collapsed into the gulf of mexico. its blowout -preventer system has failed so thousands

  The velocity is 20 ftsec after the 200 pipe run this 6 pipe

a 6 nominal pipe size schedule 40 pipe hase a chamfered entrance and 200 ft long. the velocity is 20 ftsec. after the

  What will be the charge on the capacitor a long time after

capacitor with capacitance 6.00 microf is connected to a resistor with r 780 o in series and an emf source of 25.0 v

  Compute the concentration of li that is required

Aluminum-lithium alloys have been developed by the aircraft industry to reduce the weight and improve the performance of its aircraft. A commercial aircraft skin material having a density of 2.47 g/cm3 is desired. Compute the concentration of Li (..

  Determine the final temperature and the change in volume

refrigerant r-134a with a mass of 0.08 kg is expanded adiabatically from a superheated vapor at 10 bar 40 c to a

  The piston will be moved slowly and reversibly until 25

one kilogram of saturated liquid methane at 160 k is placed in an adiabatic piston-and-cylinder device and the piston

  Before heating measurements indicate the volume in the

r-134a is loaded into a weighted pistoncylinder unit. the mass of refrigerant is 10 kg. before heating measurements

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd