A steel disc 300 mm diameter of mass 29kg is suspended from

Assignment Help Mechanical Engineering

Reference no: EM13632722

A steel disc 300 mm diameter of mass 29kg, is suspended from the end of a wire 2.5 mm diameter and 1.5 m long which is clamped into a central hole in the disc. The upper end of the wire being rigidly supported. When the disc is set in torsional vibration, it is found to make 10 complete oscillations in 78.2 seconds.

a) Find the modulus of rigidity of the wire, [Answer: 82.4 GN/m2]

b) Calculate the amplitude of the oscillation which may be allowed if the maximum permissible intensity of shearing stress in the wire is 140 MN/m2.

Reference no: EM13632722

Questions Cloud

Knowing that the cylinder rolls without sliding on the : a 9 in radius cylinder of weight 18lb rests on a 6lb carriage. the system is at rest when a force p of magnitude 2.5lb

Steam is supplied to a two stage turbine at 40 bar and 350 : steam is supplied to a two stage turbine at 40 bar and 350 c. it expands in the first turbine until it is just dry

Having already defined center of gravity in the laboratory : 1. having already defined center of gravity in the laboratory exercise question why does the center of gravity move in

What is the probability that the average duration is : the duration of alzheimers disease from the onset of symptoms until death ranges from 3 to 20 years with a mean of 8

A steel disc 300 mm diameter of mass 29kg is suspended from : a steel disc 300 mm diameter of mass 29kg is suspended from the end of a wire 2.5 mm diameter and 1.5 m long which is

The atomic mass of lithium-6 is 6015123 u how much energy : the atomic mass of lithium-6 is 6.015123 u. how much energy is required to completely separate the nucleons in a

The previous analysis of paper boxes showed that the : the previous analysis of paper boxes showed that the standard deviation of their lengths is 15 millimeters. a packer

The turbine rotor in the power plant of a ship as shown in : the turbine rotor in the power plant of a ship as shown in fig. 3 has a weight of 12.75 kn with centre of gravity at g

Determine the maximum load that can be applied for the : a plate 50 mm wide and 15 mm thick is loaded in tension. the plate is made from steel with yield strength of 1500 mpa

User Account

All Pages