A refrigerator uses refrigerant-134a as the working fluid

Assignment Help Mechanical Engineering
Reference no: EM13625911

A refrigerator uses refrigerant-134a as the working fluid and operates on the vapor-compression refrigeration cycle. The evaporator and condenser pressures are 200 kPa and 1400 kPa respectively. The isentropic efficiency of the compressor is 88 percent. The refrigerant enters the compressor at a rate of 0.025 kg/s superheated by 10.1 C and leaves the condenser subcooled by 4.4 C. Determine (a) the rate of cooling provided by the evaporator, the power input, and the COP. Determine (b)the same parameters if the cycle operated on the ideal vapor-compression refrigeration cycle between the same pressure limits.

Reference no: EM13625911

Questions Cloud

Determine total mass of water in the piston cylinder device : a freely moving piston cylinder device containing steam at 270 degrees celsius and 1000 kpa is taken outside ona cold
A particle has a rest mass of 664times10-27 kg and a : a particle has a rest mass of 6.64times10-27 kg and a momentum of 2.10times10-18 kg ms.a what is the total energy
Ten kg of water is in a closed container with a volume of : ten kg of water is in a closed container with a volume of 0.73 m3 and a temperature of 1000 degc. determine the amount
As 7710 kg copper bar is put into a smelter for melting the : as 771.0 kg copper bar is put into a smelter for melting. the initial temperature of the copper is 300.0 k. how much
A refrigerator uses refrigerant-134a as the working fluid : a refrigerator uses refrigerant-134a as the working fluid and operates on the vapor-compression refrigeration cycle.
A cylinder fitted with a movable piston contains ideal gas : a cylinder fitted with a movable piston contains ideal gas at 27degc pressure 0.50 x 105 pa and volume 1.25 m3. what
Five years ago the standard deviation of the ages of the : five years ago the standard deviation of the ages of the undergraduate business students was 1.5 years. recently a
To find the minimum distance b to get the ball over the top : to find the minimum distance b to get the ball over the top im not sure weather you use conservation of mech energy or
A natural gas-fired furnace in a textile plant is used to : a natural gas-fired furnace in a textile plant is used to provide steam at 130 c. at times of high demand the furnace

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Water enters an insulated nozzle operating under steady

water enters an insulated nozzle operating under steady conditions at a pressure of 60 psia a temperature of 350 degf

  The pressure of the flow at the turbine exit is 225 kpa

steam enters an isentropic turbine at 7 mpa and 500 degrees c with a mass flow rate of 3.2 kgsec. the pressure of the

  Assuming the constant specific heats provided calculate the

a methane combustion chamber has the following inlet conditions kj 1000j t2693 k mfr280.4kgsec ft0.026 tf480k hm50000

  Minimum weight design of a variable shape three-bar

minimum weight design of a variable shape three-bar truss.numerical solution using the matlab optimization toolbox

  The frictional driving force acting on the wheels of the

for a short period of time the frictional driving force acting on the wheels of the 2.4-mg van is fd 600t2 n where t

  Assume the roughness wavelength is 10m and its amplitude is

a car and its suspension system are idealized as a damped spring-mass system with natural frequency 0.5hz and damping

  A large vessel had experienced an internal leak of a

a large vessel had experienced an internal leak of a coolant. it was friday and the work crew needed to get the vessel

  The bungee cord has an undeformed length of 350 ft what is

if a 150 lbf person wants to bungee jump from a bridge that is 400 feet above the surface of a river and the bungee

  Determine the stream ecomomy of the system assume that the

feed at 10 ccelsius containing 20 solids enters an evaporator operating at 90 ccelsius. saturated steam90 quality

  Derive expressions for displacement velocity and

a particle is moving along a straight line from an origin o and has acceleration a of ks ms2 where k is a constant s is

  A boat travels at a constant speed of 15 ms around the

a boat travels at a constant speed of 15 ms around the circumference of a half circle in a time span of 45 s. what is

  Electric power is to be generated by installing a hydraulic

electric power is to be generated by installing a hydraulic turbine-generator at a site 130m below the free surface of

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd