A material with a true stress strain curve

Assignment Help Mechanical Engineering

Reference no: EM13719883

A material with a true stress strain curve? = 350 E0.25 MPa is used in wire drawing.

a) Calculate the maximum reduction in cross sectional area per pass based on ideal conditions.

b) Using excel, plot the drawing stress as a function of strain and the stress strain curve and find the strain at which both curves intersect.

c) Assuming that friction and redundant work compose a total of 60% of the ideal work of deformation. Calculate the maximum reduction in cross sectional area per pass.

Reference no: EM13719883

Questions Cloud

The power developed by the turbine : A gas turbine has a mixture of 17% CO2 , 60% N2 and 17% H2O on a molar basis enter at 1800°R and 116 psi and a mass flow rate of 4.41 lbm/s. The gas expands through the turbine isentropic ally to a pressure of 14.7 psi and a temperature of 1112.4°R.

Amagots law and the generalized compressibility chart : A rigid tank contains 2 kmol of N2 and 6 kmol of CH4 gases at 200 K and 12 MPa. Estimate the volume of the tank using Amagot’s Law and the generalized compressibility chart

What is the molecular weight of the mixture : A gas mixture exists composed of 45% O2, 35% CO2 and 20% Ar on a molar basis. The pressure of the gas is 1 atm and the temperature is 50°F.

Determine collars velocity and acceleration at this instant : Collar C moves along rod BA with a velocity of 3 m/s and an acceleration of .5 m/s^2 both directed from B towards A and measured relative to the the rod. At the same instant, rod AB rotates with the angular velocity and angular acceleration shown. De..

A material with a true stress strain curve : A material with a true stress strain curve? = 350 E0.25 MPa is used in wire drawing. Calculate the maximum reduction in cross sectional area per pass based on ideal conditions.

Calculate the net entropy change of the system : A hollow steel sphere with a 0.5 m inside diameter and a 2 mm thick wall contains water at 2MPa, 250°C. The system (steel plus water) cools to the ambient temperature, 30°C. Calculate the net entropy change of the system and the surroundings for this..

Determine the final mass in the cooker : A pressure cooker has a volume of 0.011 m3 and initially contains a two-phase liquid-vapor mixture of H2O at a temperature of 100o C and a quality of 10%. As the water is heated at a constant volume, the pressure rises to 2 bar and the quality become..

Rectangular unfinished concrete channel with a width : A rectangular unfinished concrete channel with a width of 18 ft conveys water at 350 ft3/s. The temperature of the water is at 30oC. The channel has a slope of 0.001. Determine the liquid depth for uniform flow. Is the flow supercritical or subcritic..

Estimate the cooling capacity of absorption chiller to be : A gas turbine (can assume an ideal Brayton cycle) has a pressure ratio of 10. It is connected to an electric generator with an efficiency of 95% which produces 300kW of electricity.

User Account

All Pages