A househusband is steaming beef for his family in a pan

Assignment Help Mechanical Engineering
Reference no: EM13625344

A househusband is steaming beef for his family in a pan with a surface area of 23.544 cm^2 that is covered with (i) a 50 g oflid, and (ii) a 6 kg of lid. Assuming there is sufficient water for steam generation inside the pan,

(a) Roughly estimated the temperature inside the pan in each case

(b) For which case will the cooking time be shorter

(c) A 6 kg lid is too heavy in Case (ii). Develop an engineering solution to reduce the mass of the lid to less than 0.4 kg while having the cooking time equal toCase (ii).

Reference no: EM13625344

Questions Cloud

A frac12 -in-diameter unf sae grade 52 bolt with rolled : a frac12 -in-diameter unf sae grade 5.2 bolt with rolled threads is preloaded to 80 of its proof load when clamping a
On an ice rink a 3 kg object initially moving a speed of 5 : on an ice rink a 3 kg object initially moving a speed of 5 ms strikes a 6 kg object initially at rest. afterwards the
What are the normal and static frictional forces on the bar : a 2m long uniform bar that weighs 10n is used to hold a 3n sign. a cable is attached to one end of the bar and the
A pump steadily draws water from a pond at 20 lbs pressure : a pump steadily draws water from a pond at 20 lbs. pressure at the inlet is 14.7 psi the temperature is 68 degrees f
A househusband is steaming beef for his family in a pan : a househusband is steaming beef for his family in a pan with a surface area of 23.544 cm2 that is covered with i a 50 g
Consider an experiment where we study the ability of snails : consider an experiment where we study the ability of snails tohold firmly onto a smooth substrate. we would like to
The initial velocity of the clay is 225 ms directed : a weather vane initially at rest has a moment of inertia of 0.104 kg middot m2 about its axis of rotation. a 47.0 g
A space station in the form of a large wheel 772 m in : a space station in the form of a large wheel 77.2 m in diameter rotates to provide an artifical gravity of 5.1 ms2 for
The pistoncylinder contains 01 kg r-410a at 600 kpa 60oc it : the pistoncylinder contains 0.1 kg r-410a at 600 kpa 60oc. it is now cooled so the volume is reduced to half of the

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the reactions of simply supported

Determine the reactions of simply supported beam to both a concentrated and uniform load. A beam with a span of 21 ft is simply supported at the left-hand end and fixed at the right-hand end.

  The mechanical errors in the joint and the inputoutput

the revolving joint type v of an industrial robot has a range of 240? rotation. the mechanical errors in the joint and

  What is the packing density

What is the packing density

  A total of 200btu of heat is transferred while the pressure

a piston cylinder device contains .5 lbs of water initially at 120 pso and a volume of 2ft3. a total of 200btu of heat

  The speed is then held constant for 198 s after which there

an automobile accelerates from rest at 2.2 ms2 for 24.6 s. the speed is then held constant for 19.8 s after which there

  Determine the factor of safety against brittle fracture

Determine the factor of safety against net section yield in the presence of the crack and determine the factor of safety against brittle fracture for the same conditions.

  If electricity costs 0 12 per kw hr find the cost of the

you have a freezer in you apartment that maintains an inside temperature at 12degreef. the coefficient of performance

  A heat engine absorbes 25 mw from a 400 c combustion

a heat engine absorbes 25 mw from a 400 c combustion chamber and rejects 15 mw to the atmosphere at 30 c. find the

  Which is probably mechanically tougher the bone or the

toughness is proportional to the amount of energy storedput in to a material or structure when a stress is applied.

  Assume no temperature change during the pumping and find

an air pump with a 4-in piston and a 12-in stroke compresses atmospheric air into a 5ft3 evacuated tank. assume no

  Dtermine the maximum stress and the direction of the

a shaft is subjected to bending and torsion such that the bending stress on the surface is 80 mpa and the shear stress

  An orthopedic called mend-a-bone is made of an

1. an orthopedic called mend-a-bone is made of an extracellular matrix extract plasticized with glycerol mw92 to help

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd