User Account

All Pages

A food department is kept at -15 degrees celsius by a

Assignment Help Mechanical Engineering
Reference no: EM13630263

A food department is kept at -15 degrees Celsius by a refrigerator in an environment at 25 degrees Celsius. The total heat gain to the food department is estimated to be 3500 kJ/h and the heat rejection in the condenser is 4500 kJ/h. Determine the power input to the compressor, in kW and COP of the refrigerator.

Reference no: EM13630263

Questions Cloud

Consider a compressor operating at steady state how would : consider a compressor operating at steady state. how would you compare the volume flow rate of the air at the inlet and
The isentropic efficiency is known from manufacturers data : an insulated turbine is operating on nitrogen. the gas enters at 3.8 atm 170degc and expands to 1 atm. the isentropic
The turbine is not well insulated and thus there is a heat : superheated steam at 500 celsius and 3 mpa enters a steady state turbine with a mass flow rate of 500 kgs. the steam
The 20degc surroundings experience an entropy increase of : consider an r-134a compressor on a refrigeration system. if the refrigerant enters as saturated vapor at 200 kpa 0.03
A food department is kept at -15 degrees celsius by a : a food department is kept at -15 degrees celsius by a refrigerator in an environment at 25 degrees celsius. the total
The loading on the piston is such that the pv product is a : water is contained in a pistoncylinder at 200 kpa 200degc and a volume of 20 l. the piston moves slowly compressing
The lowest temperature that has been achieved is about 1 : the lowest temperature that has been achieved is about 1 times 10-6 k. to achieve this an additional stage of cooling
A ball is thrown horizontally from the top of a building : a ball is thrown horizontally from the top of a building that is 15.67 m high with a speed of 23.47 ms. neglecting air
An inventor claims to have developed a device that takes an : an inventor claims to have developed a device that takes an air stream at 20degc 274 kpa and produces two separate

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What is the pressure at the bottom of a 300 ft tall dam

what is the pressure at the bottom of a 300 ft tall dam psi? and what is the flowrate of a river that must flow through

  Sae grade number 7 bolts are used bearing strength of plate

a removable bracket must be attached to the frame of a machine tool as a support. the need for interchangeability

  For a 3 sigma control chart what is the probability of four

for a 3 sigma control chart what is the probability of four successive points plotting outside 2 sigma limits? if such

  Determine the heat transfer and the entropy produced during

a piston-cylinder assembly with a free piston contains 0.45 m3 of propane vapor and 0.05 m3 of liquid propane as a

  A heat engine accepts 200000 btu of heat from a source at

a heat engine accepts 200000 btu of heat from a source at 1500 r and rejects 100000 btu of heat to a sink at 600 r.

  As part of a pollution study a model concentration c as a

as part of a pollution study a model concentration c as a function of position x has been developedcx ae-x2a -

  Saturated vapor steam at 5 psia eneters an adiabatic heat

saturated vapor steam at 5 psia eneters an adiabatic heat exchanger and leaves as saturated liquid at 5 psia. the steam

  A projectile is launched from point a with initial speed v0

a projectile is launched from point a with initial speed v0 and makes an angle ?n with the horizontal. it hits the

  Convert the composition

Convert the composition of the following alloy from atom percent to weight percent (a) 44.8 at% of silver, (b) 46.3 at% of gold, and (c) 8.9 at% of Cu. Assume that the atomic weights for silver, gold and copper are, respectively, 107.87, 196.97 an..

  Determine angle theta degrees that requires minimum torque

Determine the angle theta degrees that requires the minimum torque T to keep the seam closed. (Hint: use Mohr's circle). Give the answer in degrees.

  Its surface temperature is 230 0c and the ambient air

a large fireplace in a ski lodge has a glass firescreen which covers a vertical opening in the fireplace. the opening

  What conditions the use of carburetor heat be detrimental

Under what conditions would the use of carburetor heat be detrimental?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd