A composite aluminium alloy e 72gpa and v 033 cylinder

Assignment Help Mechanical Engineering
Reference no: EM13345375

A composite aluminium alloy ( E= 72GPa and v = 0.33 ) cylinder is made up of an inner cylinder with inner and outer diameters of 80 and 120mm, respectively, and outer cylinder with inner and outer diameters of and 120 and 240mm, respectively. The composite cylinder is subjected to an internal pressure of 160MPa.

What the shrinkage pressure must be if the hoop stress at the inside of the composite cylinder is equal to 130MPa. Draw the stress distribution along the walled thickness and discuss whether the composite with the applied pressure is safe or not by using von-Mises and Tresca theory. 

Reference no: EM13345375

Questions Cloud

If 156 ml of wet h2 is collected over water at 24 degrees : if 156 ml of wet h2 is collected over water at 24 degrees celcius and a barometric pressure of 737 torr how many grams
If 280 ml of 150 m hcl is needed to neutralize all the nh3 : if 28.0 ml of .150 m hcl is needed to neutralize all the nh3 from a 2.25-g sample of organic material calculate the
Discuss two ways that ammonium compounds decompose when : all ammonium compounds which contain an ammonium ion nh4 and a negative ion are thermally unstable.a. discuss two ways
A positive charge of magnitude q1 lies at the origin : a positive charge of magnitude q1 lies at the origin. derive an expression for the incremental work done in moving a
A composite aluminium alloy e 72gpa and v 033 cylinder : a composite aluminium alloy e 72gpa and v 0.33 cylinder is made up of an inner cylinder with inner and outer
A sphere of radius a has a bound charge of q distributed : a sphere of radius a has a bound charge of q distributed uniformly over it. the sphere is surrounded by a uniform fluid
The rigid gateoab of fig p258 is hinged ato and rests : the rigid gateoab of fig. p2.58 is hinged ato and rests against a rigid support atb. what minimum horizontal forcep is
Suppose a fair coin is tossed n times each coin toss : suppose a fair coin is tossed n times. each coin toss costs d dollars and the reward in obtaining x heads is ax2 bx.
He uses a mercury barometer to measure the atmospheric : a mountain climber determines his altitude using atmospheric pressure and temperature measurement data. he uses a

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Estimate the smallest diameter of a rod

The compression strength of Kevlar 49 fiber is about one-eight of its tensile stress. Estimate the smallest diameter of a rod on which 12 um diameter Kevlar fiber can be wound without causing kinks on its compression side.

  What is the thrust in kn of this engine

Bypass air exits at 600 m/s while combustion air exits at 1000 m/s. What is the thrust in kN of this engine?

  Determine the reaction force exerted by the nozzle

a curved nozzle assembly that discharges water to the atmosphere is shown. The nozzle mass is 4.5 kg and its internal volume is 0.002 m^3. The fluid is water. determine the reaction force exerted by the nozzle on the coupling to the inlet pipe.

  How long would it take to use up current reserves

how long would it take to use up current reserves? suppose the total resource is five times current reserves; if the use rate continues to grow at 2.6 percent, how long would it take to use up the resource?

  Determine the range of te distance d

the maximum allowable value of each of the reactions is 180 N neglecting of the weight of beam, determine the range of te distance d for which the beam is safe.

  Determine the heat flux and the temperature gradient

consider a plane wall 100mm thick and of thermal conductivity 100 w/m .k seady state conditions are known to exist with T1 = 400 k T2= 600 K. determine the heat flux and the temperature gradient off the coordinate systems.

  Carrying a uniformy distributed load

The bending moment M at position x m from the end of a simply supported beam of lenght L m carrying a uniformy distributed load of w Kn m-1 is given by

  Determine the normal stress

If the bar is subjected to centric forces of magnitude P = 30 kN and knowing that EA = 70 GPa and EB = 105 GPa, determine the normal stress (a) in the aluminum layers, (b) in the brass layer.

  Design a bridge

Design a bridge that will withstand 4 fully loaded semi-trailers

  Determine the velocity of each block

Block A has a mass of 3 kg and B has a mass of 5 kg. If the system is released from rest, determine the velocity of each block in t=4s. Neglect the mass of the pulleys.

  A male reactor operator receives a whole body dose

a male reactor operator receives a whole body dose equivalent of 0.96 rem over a period of one week while working with

  Tooling design for composite manufacturing

Write a term paper on Tooling design for composite manufacturing - how tooling is designed for different applications to make composite airplane parts and such.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd