1tensile tests were done on a steel bar an aluminum bar and

Assignment Help Mechanical Engineering
Reference no: EM13629541

1.Tensile tests were done on a steel bar, an aluminum bar and a plastic bar. The bars all had a diameter of 0.505 inches. The initial length (Lo) for each was 2.000 inches.

a.Write the expression which is used to calculate yield strength.

b.Write the expression which is used to calculate tensile strength.

c.Write the expression which is used to calculate % Elongation.

Reference no: EM13629541

Questions Cloud

When operating it is necessary to limit the vibration : a machine of total mass 100 kg is mounted on a suspension which has a static deflection under the weight of the machine
Assuming that the outcomes listed in part a were equally : if a couple were planning to have three children the sample space summarizing the gender outcomes would be bbb bbg bgb
A wall of thickness 01 m and thermal conductivity 25 wmk : a wall of thickness 0.1 m and thermal conductivity 25 wmk having uniform volumetric generation of 0.3 mwm3 is insulated
A wind tunnel is 6m long and has a cross section of 1m2 air : a wind tunnel is 6m long and has a cross section of 1m2. air flows through at 70ms at standard sea-level conditions
1tensile tests were done on a steel bar an aluminum bar and : 1.tensile tests were done on a steel bar an aluminum bar and a plastic bar. the bars all had a diameter of 0.505
Find the elapsed time to vaporize the propane and total : a factory has a large liquid propane storage tank. the propane is to be used as vapor. evaporation of the liquid
At the moment the train begins to accelerate forward at : a spring-loaded cannon aimed at 41 o above the horizontal is on the last car of a long train of flat cars. the train
Find the correlation r between wine intake and relative : some studies have suggested that a nightly glass of wine may not only take the edge off a day but also improve health.
A medical defibrillator stores 1000 j of energy in a 100 : 1. a parallel-capacitor is connected to a battery. what happens to the stored energy if the plate separation is doubled

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Obtain a relation for the variation of temperature in the

consider a large plane wall of thickness l0.4 m thermal conductivity k 1.8 wmmiddotdegc and surface area a 30 m2. the

  What should have been the weight density pg of this mud in

at a depth of 18360ft fillers on the deepwater horizon encountered fluid at a reservoir pressure of 8900 psia. in order

  Per the linked problem i dont understand how the shear

per the linked problem i dont understand how the shear calculation is done. why is vf and vb 333.33 lb.ft? i understand

  A commercially available sump pump is capable of

a commercially available sump pump is capable of deliver-ing 2800 gallons per hour of water through a vertical lift of

  Taking the water and the air in the room to be closed

a dish of liquid water is placed on a table in a room. after a while all of the water evaporates. taking the water and

  A long trough is supported by a continous hinge along its

a long trough is supported by a continous hinge along its lower edge and by a series of horizontal cables attached to

  The flux density of a magnetic field is 20000 lines per sq

the flux density of a magnetic field is 20000 lines per sq in. what length of conductor should cut the flux to produce

  Find a the partial pressures of the air and water vapor b

a space is at a temperature of 75 f 24 c and the relative humidity is 45 percent. find a the partial pressures of the

  A radiation detector having a sensitive area of

a radiation detector having a sensitive area of ad4times10-6 m2 is configured to receive radiation from a target area

  Assuming that the water moves along the blade at a constant

a nozzle discharges a stream of water of cross-sectional area a with a velocity va. the stream is deected by a single

  Assuming ideal gas behavior for the air and neglecting

a rigid well-insulated tank with a volume of 3 fe contains air at p1 22 lbfin2 and t1 475 bullr. the air is stirred by

  A compressor installed at a whalf for loading container

a compressor installed at a whalf for loading container ships is able to provide 6 bar.g pressure into the pressure

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd