Explain concepty of worktable in radial drilling machine, Mechanical Engineering

Explain concepty of Worktable in radial drilling machine

The worktable is supported on an arm mounted to the column. The worktable can be adjusted vertically to accommodate dissimilar heights of work or it can be swung completely out of the way. It might be tilted up to 90 degree in either direction, to permit long pieces to be end or angle drilled.

 

Posted Date: 5/31/2013 5:38:33 AM | Location : United States







Related Discussions:- Explain concepty of worktable in radial drilling machine, Assignment Help, Ask Question on Explain concepty of worktable in radial drilling machine, Get Answer, Expert's Help, Explain concepty of worktable in radial drilling machine Discussions

Write discussion on Explain concepty of worktable in radial drilling machine
Your posts are moderated
Related Questions
How ca I make an opc & fpc chart

break power of two stroke engine

Spot welding of different metals-Stainless steel Stainless steel is having lower thermal conductivity compared to mild steel. Therefore, it requires less heat input. But, stain

Q. Describe about Austenitic stainless steels? Austenitic stainless steels (300 series) generally exhibit very good corrosion resistance in sulphuric acid service for low conce

Define Cam Operated Clamp 1. The cams operated clamp find wide application and are fast and positive in action. 2. These should not be used where vibrations are present or w

Q. Functions of geometric modeling? Design Analysis • Evaluation of area, volume, mass and inertia properties. • Interference checking in assemblies. • Analysis of

Q .  Determine MI of unequal angle section 15cm × 10cm × 1.5cm with longer leg vertical and is flange upwards. Figure Sol. :                      A 1 = 10 ×

Explain the Hydrostatic sensor paver machine Machine Name: - Hydrostatic sensor paver machine   We give Mechanical Paver and Mechanical Screed, which are used for laying w

Find out change in diameter: A cylindrical shell, 0.8 m in a diameter and 3 m long is along with 10 mm wall thickness. If the shell is subjected into an internal pressure of 2

Desgin of furnce - combustion chamber: • Deside on type of furnace :need review of furnace types (grete,fluidized bed,puluerised coal or other. • Sectch of furnace design with