What is the maximum amount of cargo

Assignment Help Civil Engineering
Reference no: EM13562649

A small truck is to be driven down a 4% grade at 70mi/hr. The coefficient of road adhesion is 0.95, and it is known that the baking efficiency is 80% when the truck is empty and decreases by one percentage point for every 100 lb of cargo added. Ignoring aerodynamic resistance, if the driver wants the truck to be able to achieve a minimum theoretical stopping distance of 275 ft from the point of brake application, what is the maximum amount of cargo (in pounds) that can be carried.

Reference no: EM13562649

Questions Cloud

Determine the direction of the resultant force measured : The driver of a car traveling up a 2% grade at an initial speed of Vo applied the brakes abruptly and the vehicle slid to a complete stop at an average deceleration of 8ft/s^s. Was the pavement wet or dry?
Determine the normal strain in each bar : The two bars shown in the figure are used to support a load P. When unloaded, joint B has coordinates (0, 0). After load P is applied, joint B moves to the coordinate position (0.35 in., -0.60 in.). Assume a = 11 ft, b = 6 ft, and h = 8 ft. Determine..
How much work must be done to move a chair : How much work must be done to move a 3.8 kg chair 6.1 m acrossthe floor at constant velocity if the coefficient of kineticfriction between the chair and the floor is 0.64
Will water bubble into the vapor phase under these : A student in the laboratory plans to exert a vacuum in the head space above a surface of water in a closed tank. She plans for the the absolute pressure in the tank to be 10,400 Pa. The temperature in the lab is 20°C. Will water bubble into the vapor..
What is the maximum amount of cargo : A small truck is to be driven down a 4% grade at 70mi/hr. The coefficient of road adhesion is 0.95, and it is known that the baking efficiency is 80% when the truck is empty and decreases by one percentage point for every 100 lb of cargo added. Ignor..
What is the maximum weight wmax of the crate that the system : Rope BCA passes through a pulley at point C and supports a crate at point A. Rope segment CD supports the pulley and is attached to an eye anchor embedded in a wall. Rope segment BC creates an angle of
Channel is designed to carry a discharge : A 10-feet trapezoidal channel is designed to carry a discharge of 1,000cfs with side slopes: Z1 = 4 and Z2 = 5.  The channel bed slope is 0.04 ff/ft and has Manning's N of 0.03. To protect the channel from erosion
Obtain the change in the entropy of the water : A freezer is used to freeze 3.0 Lof water completely into ice. The water and the freezer remain at aconstant temperature of T = 0°C. Determine the change in the entropy of the water
Determine the weight of the satellite in pounds when it : A satellite would have a mass of 200 kg on the surface of the moon. Determine the weight of the satellite in pounds when it is in orbit 10,000 mi. above the surface of the earth.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute how much the 10 feet thick clay layer swelled

A 10 feet thick clay that was unsaturated with a unit weight of 108 pcf and a water content of 20% gets saturated and also swells by 20% due to rain. G=2.70.

  What tube diameter is needed if water level in tube is rises

An open, clean glass tube (theta = 0 degrees) is inserted vertically into a pan of water. What tube diameter is neededif they water level in the tube is to rise one tube diameter (dueto surface tension)

  Rocket velocity as a function of time

(a) Use differentiation to find a general expression for the rocket's velocity as a function of time, (b) When is the velocity zero?

  Determine head loss through this pipe section

A pipe carrying oil of specific gravity (SG = 0.877) changes in size from 150 mm at section E to 450 mm at section R (E and R are arbitrary designations of the two points in the system).  Section E is 3.66 m lower than R

  Determine the radius of wheels neglecting rolling resistance

If the coefficient of kinetic friction between the 12.5 mm diameter axles and the wheels is mu_k = .3, determine the radius of the wheels. neglect rolling resistance of the wheels on the surface.

  Determine the maximum tensil and compressive stresses

the vertical portion of the press shown below consists of rectangle tube of wall thickness t=8mm. knowing that the press has been tightened on wooden planks being glues together until P = 20 kN,

  Determine the amount of air added to the tank in lbm

A rigid tank contains 40 lbm of air in 20 psia and 70 degrees F. More air is added to the tank untill the pressure and temperature rise to 35 psia and 90 degrees F, respectively.

  What is the steady-state concentration of lead

The City of Leadville (dimensions 120 * 120 km ) is characterized by an average daily emission rate of 4700 kg/d of particulate lead into the atmosphere from auto exhaust and industrial processes.

  What depth of aggregate is needed if angle theta is 40degree

A 2000-lb wheel load is to be supported by aggregate over soil with a maximum bearing pressure of 1000 lb/sqft. What depth of aggregate is needed if the angle theta is 40 degrees

  Design a series of closely spaced parallel box beams

Design a series of closely spaced parallel box beams that will support an asphalt road surface over a 10 foot wide, 40 foot long span. The hollow box beams are made of concurred and imbedded No. 8 steel rods (1 inch dia.).

  Find the inititial population

A 5 cm diameter, 6 m high pole is fixed in concrete. The pole supports a circular 4 m diameter sign. Estimate the maximum moment that must be resisted by the concrete for a wind speed of 30 m/s (wind is assumed normal to the sign; density of air = 1...

  Determine size of proportioning pump to feed ferric chloride

Determine the size (liters/hour) of a proportioning pump to feed ferric chloride for a 0.438 m^3/s water treatment plant. The optimum dose selected is 50 mg/L.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd