What is the concentration of bod in the river-wastewater mix

Assignment Help Civil Engineering
Reference no: EM13557069

1.The City of Leeds (England) discharges about 1.4 m3/sec to the Aire River. Without the wastewater discharge, the river flow rate would be 12.7 m3/sec. Given that BOD(river) = 3.0 mg/L and BOD(wastewater) = 30.0 mg/L, what is the concentration of BOD in the river-wastewater mix just below the outfall?

2.Compare the monolithic approach, the layered approach, and the microkernel approach in terms of degree of difficulty to debug, portability, efficiency, and degree of structure.

Reference no: EM13557069

Questions Cloud

Neglecting drive train losses what is the average power : A cyclist rides up a local mountain at an average speed of 11 mph. The road has an average grade of 5.5%. The cyclist and her bike have a combined mass of 75 kg. The force from road drag is 2.5 N and the aerodynamic drag (in Newtons)
Sub 12 means from stage one to two heat transfer : Sub 12 means from stage one to two. Heat transfer (Qsub12) occurs to a fluid of mass m whose volume increases at a constant pressure of 21 bar. Assume that the fluid is air (Csubv=0.718 kJ/kg *K and R=0.287 kJ/kg*K) and that Tsub1=725K and Tsub2=1100..
What is the change in internal energy of the system : What is the change in internal energy of the system? Assume the displacement work in a (fully resisted) constant pressure process is given by (*sub 12 means from stage 1 to 2) Wsub12=p(Vsub2-Vsub1).
What should the spring stiffness be if the spring : A 2 kg block is projected up a frictionless plane with and initial speed of 8 m/s. The plane is inclined upward at 30°. If the block travels 5 m before striking a linear spring, what should the spring stiffness be if the spring compression is to be l..
What is the concentration of bod in the river-wastewater mix : Compare the monolithic approach, the layered approach, and the microkernel approach in terms of degree of difficulty to debug, portability, efficiency, and degree of structure.
How much heat energy is radiatred from each of the disk : Given the heat transfer of the disk rotor is 120 W/m2/K, how much heat energy is radiatred from each of the disk rotors when the ambient air temperature is 30 C
What is the concentration of particles in the air : A hi-vol clean filter weighs 18.00 g. After a 24 hour sampling period the filter is removed and weighs 18.65 g. The initial flow rate through the filter was 2.5 m3/min. When the filter was removed the flow rate through the filter was 1 m3/min. What i..
Determine the magnitude of the force of the rod on the : Using a forked rod, a smooth cylinder C having a mass of 0.5 kg is forced to move along the vertical slotted path r = 0.5? m, where ? is in radians. If the angular position of the arm is ?
Determine the maximum force p that can be applied without : Determine the maximum force P that can be applied without causing the two 50-kg crates to move. The coefficient of static friction between each crate and the ground is 0.25 The crates are next to each other connected

Reviews

Write a Review

Civil Engineering Questions & Answers

  What investment can be justified for the new surface

Annual maintenance cost for a particular section of highway pavement are $2000. The placement of a new surface would reduce the annual maintenance cost to $500 per year for the first 5 years and to $1000 per year for the next 5 years.

  Determine the asd reference and adjusted design values

Determine the ASD reference and adjusted design values for the following members and loading conditions. All members are Select Structural Southern Pine and are fully braced to prevent lateral torsional buckling. Bending Occurs about the strong ax..

  Engineering ethics concepts and cases

Engineering ethics concepts and cases

  Determine void ratio and the porosity of undisturbed soil

A sample of undisturbed soil has a dry weight of 10 lb and volumen of 1 ft^3. If the specific gravity of the soil solids is 2.65, determine the void ratio and the porosity.

  Which reactor should be preferred for the treatment plant

Chemical ‘A' is regulated by EPA and the maximum allowable concentration in water is 5 ?g/L. Design a reactor for a water treatment plant where 1000 ppm of chemical ‘A' is introduced at a flow rate of 100 m3/min.

  Describe how the following ratios and indices are used

A breif explination on clay mineralogy including isomorphous substitution, specific surface, cation exchange capacity and their effect on clay properties.

  Determine the speed when the flow and free flow speed

A section of highway has a speed-flow relationship of the form "q = au^2 + bu" It is known that at capacity (which is 3100 veh/hr) the space mean speed of traffic is 28mi/hr.

  Estimate critical pressure of mixture of methane nd n-hexane

Estimate the critical pressure of a mixture of methane and n-hexane if the critical temperature of the mixture is known to be 200 F. Compare your answer with the critical pressures of pure methane and pure n-hexane.

  Find the probability that a random sample of n specimens

The compressive strength of concrete has a (population) mean of 2500 psi and a (population) standard deviation of 50 psi. Find the probability that a random sample of n= 5 specimens will have a sample mean strength

  Determine the most efficient cross section with a bedslope

An open channel with a trapezoidal configuration with side batters 1V:3H is to be designed to carry 1.0m^3/s with a bedslope of 0.0065. The channel is lined with concrete with manning's n of 0.011.

  Calculate for the whole catchment values of annual average

A watershed has four sub-areas. The annual precipitation and evaporation from each of the sub-areas are given in Table(below). Assume that there is no change in groundwater storage on an annual basis and calculate for the whole catchment the value..

  Write a short class that shows an increment and decrement

A beam of length 3m with a non-uniform load of zero at end Aand 200N/m at end B i.e a vertical loading of 1/2 *200*3N with abending moment about A of 1/2*200*3*(2/3*3). The beam is supportedat end A for a distance of 0.5 m and a uniform suport force ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd