+1-415-670-9189
info@expertsmind.com
Solve for steady-state concentration of both compounds
Course:- Civil Engineering
Reference No.:- EM13298396





Assignment Help >> Civil Engineering

Atrazine, a neutral triazine herbicide manufactured by the Ciba-Geigy group, undergoes biological and chemical decomposition to form hydroxy-atrazine. a).Assuming a pseudo first order decay constant of 0.01/day for atrazinr and 0.005/dayfor hydroxy-atrazine, solve for steady-state concentration of both compontds (A and H) in a rural lake assumed to be completely mixed. Given- Volume of lake=10,000m^3, Qin=Qout=100m^3/day , Cin=10 micro metres




Put your comment
 
Minimize


Ask Question & Get Answers from Experts
Browse some more (Civil Engineering) Materials
Water, initially dry saturated vapour at 4 bar, lls a closed rigid con- tainer. The water is heated until its temperature is 400C. Determine the work done and the heat transfe
Moist air at standard conditions is at a dry bulb temperature of 80 degree F and a relative humidity of 50%. It is cooled to 50 degree F. Use the psychromtric chart to deter
Calculate the total head loss in theclean filter if the loading rate and what is the required disinfection for the removal of Giardia cysts of the filtered water if free chlo
Find the uniform flow depth (in feet) of a concrete trapezoidal channel with a bottom width of 30 ft. and side slopes of 2:1. The channel is laid at a slope of 0.05% and car
A circular bar under pure torsion needs to transfer 50 N*m of torque. The total bar length is 1 m and the total rotation can not exceed 2 degrees. The bar is made of a mater
A trapezoidal canal 6m wide at the bottom and having a side slope of 1V:2H carries water with a mean velocity of 1.0m/s to a depth of 60cm. What length of contracted rectang
Find the limiting length of an offset so that the displacement of a point on paper is may not exceed 0.025 centimetres.The offset was laid 3 degree out from it's true directio
Assume a cross-sectional medial length of 32 in. (no stretching of the sheet due to bending). If the maximum shear stress must be limited to 19 ksi, determine the maximum to