How many gallons of water are contained in the tank

Assignment Help Civil Engineering
Reference no: EM13298151

A spherical water tank is 10 ft in diameter. Develop a table that shows: 1) How many gallons of water are contained in the tank if the volume is measured in increments of 1 ft from the bottom to the top. 2) The mass of water at each increment, expressed in lbm.

Reference no: EM13298151

Questions Cloud

Resolutions within the first three months : What percent of people break New Year's resolutions within the first three months?
Find what design speed was used for freeway exit ramp : A freeway exit ramp has a single 12-foot lane and consists entirely of a curve with a central angle of 90 degrees and L=628 feet. If the distance cleared of obstacles is 19.4 feet from the centerline, what design speed was used
Explain the relationship between motivation and behavior. : Explain the relationship between motivation and behavior.
Puzzled-decrease in sales at one of the auto zone locations : Wade is puzzled by the recent decrease in sales at one of the Auto Zone locations for which he is the regional manager. He knows the best way to approach this problem and obtain accurate information is to use
How many gallons of water are contained in the tank : Develop a table that shows: 1) How many gallons of water are contained in the tank if the volume is measured in increments of 1 ft from the bottom to the top. 2) The mass of water at each increment, expressed in lbm.
Compute the wavelength of light necessary to provide : Calculate the wavelength of light necessary to provide photons of this energy? C) Explain why this film can be handled in a darkroom under red light.
What is motivation : What is motivation? What are the major sources of motivation? Which source affects you the most? Why?
What thrust does the engine develop at lift off : A rocket has a total mass of 1.00 x 105Kg and a burnout mass of 1.00 x 104Kg, including engines, shell, and payload. What thrust does the engine develop at lift off
Used the scientific process : Write a 200- to 300-word response to the following: How have you used the scientific process

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is bulk modulus of a liquid that has a density increase

What is the bulk modulus of a liquid that has a density increase of 0.02 percent for a pressure increase of 1000 lb/ft^2

  Standard deviation in lines of levels

Lines of levels were run requiring n instrument setups. If the rod reading for each backsight and foresight has a standard deviation δ what is the standard deviation in each of the following level lines?

  Calculate the final length and final diameter of specuman

A cylinder with a 6.0 in., diameter 12.0 in. height is put under a compresive load of 150 kips. The modulus of elasticity for this specimen is 8000 ksi and Poisson's ratio is 0.35. calculate the final length and the final diameter of this specuman..

  Calculate earth gravitational force

Calculate Earth's gravitational force on the Shuttle astronauts while orbiting at an altitude of 220 miles (or 354 km) above Earth's surface.

  Will the vc meet minimum ssd standards if speeds limited

A particular crest vertical curve (VC) on US 280 at Shelton Mill Rd has long been criticized as being unsafe. Its length is 400 feet. The prevailing speed on the crest VC is 50 mph. In its present condition, its tangent grades are G1=2 percent and..

  Finding the gallons of mercury

How many gallons of mercury (sg=13.54) would weight the same as 5 gallons of castor oil which has a specific weight of 56.69 pcf?

  Calculate max torque that can be carried by hollow section

Assume a cross-sectional medial length of 32 in. (no stretching of the sheet due to bending). If the maximum shear stress must be limited to 19 ksi, determine the maximum torque that can be carried by the hollow section

  List five soil and water management strategies

List five soil and water management strategies appropriate for agricultural use of ultisols. 100-150 word limit.

  How the values compare to each other for each of flow types

For each subcritcal, critcal, and supercritcal flows, comment on the values for the Froude number, the depth of the water channel, and the specific energy. How do these values compare to each other for each of the flow types

  Length of contracted rectangular weir

A trapezoidal canal 6m wide at the bottom and having a side slope of 1V:2H carries water with a mean velocity of 1.0m/s to a depth of 60cm. What length of contracted rectangular weir 1.0m high should be placed at the middle of the canal to make th..

  Prepare and tabulate the design aid for partial flow

Prepare and tabulate the design aid for partial flow as per the equations for interpolation of velocity and diameter for corresponding flows.

  What must be the radius of the steel wire

What must be the radius of the steel wire if it is to stretch the same distance as the aluminium wire, so that the two wires maintain equal lengths after the masses are attached?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd