Find natural frequency and resonant frequency

Assignment Help Mechanical Engineering

Reference no: EM13701761

You have a spring-mass-damper-system, where when the 200g mass was hung on the spring-damper assembly, it deflected by 2 cm

Find natural frequency?

Find resonant frequency

Note that:

The mechanical friction of the damper is 2950 gm/s

and

Kx = mg

Reference no: EM13701761

Questions Cloud

Rounded to the nearest integer that ball reaches above tee : A golf ball is driven off a tee that is elevated 30 ft above the fairway and hits the ground that is below 30 ft from the tee. The initial velocity of the ball is 120 ft/s at an angle of 40 degrees from the horizontal.

Load of chemicals hits the front edge of the fire : You are a pilot of a plane fighting a forest fire, you are flying 1000ft above the ground at a speed of 90 miles per hour and are going to drop a 5000 pound load of fire suppressing chemicals onto the fire, how far from the front line of the fire mus..

All devices have the same amount of energy : There are three copper blocks, A, B, and C, containing 10 kJ of energy at 600 C, 200 C, and 100C, respectively, and a fourth iron block, D, containing 10 kJ of mechanical energy. (Thus, all devices have the same amount of energy.) The surrounding tem..

Pretend that you are participating in a public safety awaren : Pretend that you are participating in a public safety awareness forum and that you have been selected to deliver a presentation on the health risks of one of the toxic substance categories that we have covered in this unit. (A power point)

Find natural frequency and resonant frequency : You have a spring-mass-damper-system, where when the 200g mass was hung on the spring-damper assembly, it deflected by 2 cm. Find natural frequency? Find resonant frequency

Amount of heat added during process-piston-cylinder device : A piston-cylinder device holds 2 kg of refrigerant fluid R-134a, initially at 500 KPa. At this state, 0.5 kg of the fluid is in the liquid phase. Heat is then added to the fluid at constant pressure to increase its temperature to 60 c.

Show the basic design for preparing the edges : Draw a sketch to show the basic design for preparing the edges of two 20-mm thick plates to be butt-joined by shielded metal arc welding with One sided access

A window-mounted room air conditioner removes energy : A window-mounted room air conditioner removes energy by heat transfer from a room and rejects energy by heat transfer to the outside air. The air conditioner cycle requires a power input of 0.434 kW and has a coefficient of performance of 6.22.

A particle traveled in a straight line in such a way : A particle traveled in a straight line in such a way that its distance (S) from a given point on that line after time (t) was S= 20t^3 -t^4 The rate of change of acceleration at time t=2 is what value?

User Account

All Pages