Determine which driver will be the first to displace later

Assignment Help Civil Engineering
Reference no: EM13555100

Vehicles A and B are traveling toward each other in the opposing lanes on a straight segment of a two-lane highway at 35 and 40 mph respectively. If the critical rates of angular change of the two drivers are 0.0065 and 0.0055 rad/s, determine

(a) which driver will be the first to displace laterally and

(b) the longitudinal distance between vehicles when the displacement will occur. Assume that the lateral separation between the vehicles is 6 ft.

Reference no: EM13555100

Questions Cloud

Computer the volume of fill that will be produced : A 3 ft deep cut is to be made across an entire 2.5-acre site. The average unit weight of this soil is 118 lb/ft^3, and the average moisture content is 9.6%.
Determine the magnitude of the reaction force exerted at b : The image is of a plane who's wheels are spread apart by 12 ft and on the ground. The left wheel being point A and the right wheel being point B. It also has an arrow around the front propeller in the clockwise direction.
What it the distance after adjusting for sag : A 200ft tape is hung in catenary. It is supported at the 80ft mark the tension is 20lbf and the weight of the tape is 3 lbf 5 0z. The measured distance is 187.01 what it the distance after adjusting for sag?
What will be the concentration of tce in the aqueous phase : The dimensionless henry's constant for TCE at 25 degrees celsius is 0.4. A sealed glass vial is prepared that has an air volum of 4mL overlying an aquesous volume of 36mL. TCE is added to the aqueous phase so that initally
Determine which driver will be the first to displace later : Vehicles A and B are traveling toward each other in the opposing lanes on a straight segment of a two-lane highway at 35 and 40 mph respectively. If the critical rates of angular change of the two drivers are 0.0065 and 0.0055 rad/s, determine
Determine whether it has an fcc or bcc crystal structure : Rhodium has an atomic radius of 0.1345nm and a density of 12.41g/cm^3. determine whether it has an FCC or BCC crystal structure.
Calculate the maximum and minimum possible dry unit weights : For a sand, the maximum and minimum possible void ratios were determined to be 0.94 and 0.33 respectfully. Find the moist unit weight of sand in lb/ft^3compacted in the field at a relative density of 60%and moisture content of 10%Given Gs=2.65
Compute the void ratio porosity degree of saturation : A cube of moist soil weighs 330 lb and has a volume of 3.00 ft3. Its moisture content is 27.0% and the specific gravity of solids is 2.72. Compute the void ratio, porosity, degree of saturation, unit weight and dry unit weight of this soil.
A small portion was removed and a moisture content test : An undisturbed cylindrical soil sample is 2.4 in. in diameter and 6 in. long. It has a weight of 1.95 lb. After finding the weight of the entire sample, a small portion was removed and a moisture content test was performed on it. The results of this ..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Engineering ethics and ethical issue

what is the engineering ethics course where to write about any engineering ethical case and discuss the ethical issue?

  Engineering ethics and concept and cases

what is the engineering ethics case related to civil engineering with reference and discuss all the engineering ethics issues which covered the "Engineering etics concepte and cases?

  Transportation and management

In the construction management, there is a lot of procurement route that are necessary and suitable for the construction industry.

  Supporting Investment Promotion: ERNST & YOUNG

Ernst & young is currently providing support to various sectors. In this regards it was felt that if this report is able to document good practices currently being adopted or planned in ceramic sector.

  Personalized Cancer Therapy-A step forward

Cancer is the uncontrolled growth of abnormal cells in the body resulting in tumours that can be benign or malignant (cancerous cells). A proper treatment is necessary to fight with this serious disease.

  Discuss the different environmental companies

Discuss the different agencies, institutes, centers, different environmental companies that are active in UAE.

  Develop a simple urban constructed wetland design

Develop a simple urban constructed wetland design.

  Evaluate company performance in relation to GRI standards

Evaluate company performance in relation to GRI standards and comment on Stigler's theory.

  Water system design

Determine the corresponding error in the computed discharge

  Hydraulic behaviour in open channel

Describe how test flumes and associated equipment are used to assess and confirm hydraulic behaviour in open channel

  Write a paper on steel sustainability

Write a paper on steel sustainability.

  Writing case study about bridge collapse

Writing case study about bridge collapse

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd