Determine what is the uncertainty in meters in the distance

Assignment Help Civil Engineering
Reference no: EM13305259

A laser range finder consists of a laser and a light receiver. It operates by bouncing a laser pulse off a mirror and measuring the time of flight, the time it takes for the pulse to leave the laser, bounce off the mirror and return to the receiver. The speed of light in a vacuum is exactly 299,792,458 m/s, so the accuracy of the distance measurement depends strictly on accuracy of the time measurement. Using a laser range finder, an engineer measures the time of flight to be 3.45 (plus or minus) 0.03 microseconds.

A. Derive a formula for the distance between the mirror and the laser/receiver, and calculate the distance using the measured time of flight

B. What is the fractional uncertainty and the percentage uncertainty of the time of flight?

C. What is the fractional uncertainty and the percentage uncertainty in the distance measured?

D. What is the uncertainty in meters in the distance between the mirror and the laser/receiver?

E. The speed of light in air is 0.02925% slower than in a vacuum. If a correction were applied to account for this, is it correcting for systematic or random error?

F. Do you think it necessary to correct the reported distance measurement because the speed of light in air is slightly slower than in a vacuum?

Reference no: EM13305259

Questions Cloud

Determine the maximum value of the tension force in string : a mass m is attached to a string of length l and released when the string is horizontal, causing the mass to fall in a circular path. determine the maximum value of the tension force in the string
What is the max tensile force that could be applied to steel : a rectangular piece of steel is 10" wide by 60" long by 3" deep, what is the max tensile force that could be applied to the steel, and what is the total elongation of the steel
The profit-maximising - loss minimising rule : Explain to him fully the profit-maximising/loss minimising rule within the context of a perfectly competitive market structure and how the profit-maximising/loss minimising rule may be applied under the three (3) scenarios viz. economic profit, norma..
The expected return on the market stays : Suppose that the Treasury bill rate is 5% rather than 3%. Assume that the expected return on the market stays at 12%. Use the following information.
Determine what is the uncertainty in meters in the distance : A laser range finder consists of a laser and a light receiver. It operates by bouncing a laser pulse off a mirror and measuring the time of flight, the time it takes for the pulse to leave the laser, bounce off the mirror and return to the receive..
How much energy is lost while the skier slides down incline : a skier of mass m is standing on a slope with an angle of elevation ø. After being given a tiny nudge, the skier slides down the slope, how much energy is lost while the skier slides down the incline
How many atoms are expected to decay : A sample contains 3.5Ã-1019 radioactive atoms with a half life of 10000 years. How many atoms are expected to decay in the first second
How long must the droplet fall to achieve a concentration : The saturation concentration for the drop is 9.20 mg/L. If, after falling for two seconds, the droplet has an oxygen concentration of 3.20 mg/L, how long must the droplet fall (from the start of the fall) to achieve a concentration of 8.20 mg/L
The standard deviation of returns on i : Hyacinth Macaw invests 54% of her funds in stock I and the balance in stock J. The standard deviation of returns on I is 15%, and on J it is 28%.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the net force acting on the body

Starting from rest, a 4.0-kg body reaches a speed of 8.0 m/s in 2.0 s. What is the net force acting on the body?

  Express f in cartesian vector form using coordinate system

The cable from point A to point B exerts a 900 N force on the top of the television transmission tower that is represented by the vector F. Express F in Cartesian vector form using the coordinate system.

  Determine what was the major principal stress at failure

A consolidated-drained triaxial test on a normally consolidated clay yielded a friction angle of 28°. If the all-round confining pressure during the test was 140 kN/m2, what was the major principal stress at failure.

  What is the cumulative depreciation through the end of year

Under the 200% DB depreciation, what is the cumulative depreciation through the end of year four? The useful life of the mixing tank is 9.5 years.

  Calculate the surface area of a rectangular

How will calculate the surface area of a rectangular open trench Length=100 mtr,Width=.6mtr,Depth= .75mtr.

  Is crack width permissible assuming the exposure is dry air

Determine the estimated width of flexural cracks that will occur in the 8" (total depth) one-way slab shown in the figure below. Assume bottom clear cover is3/4". is the crack width permissible assuming the exposure is dry air

  Describe electron and hole motions in a p-n junction

Briefly describe electron and hole motions in a p-n junction for forward and reverse biases;

  Find q and w for each process and put values in table

A Carnot power cycle uses 0.45 kg air, modeled as an ideal gas, as the working fluid. The net work, Wcyc, is 93.64 kJ and the thermal efficiency is 0.6. During the isothermal expansion the volume triples.

  What proportion of connectors fail during warranty period

The probability is 1% that an electrical connector that is kept dry fails during the warranty period of a portable computer. If the connector is ever wet, the probability of a failure during the warranty period is 5%.

  Determine the mass ratio

Determine the mass ratio, For a vehicle in gravitationless space, determine the mass ratio necessary to boost the vehicle velocity by 1600 m/sec

  Compute the water content

A small chunk of the original sample had a wet weight of 140.9 grams and weighed 85.2 grams after drying. Compute the water content, using the correct number of significant figures.

  What is shear force exerted by oil on m long section of pipe

the flow profile is such that u=u(max)*(1-(r/R)^2) where u is the flow speed and r is the distance from the centre of the pipe in the radial direction. What is the shear stress on the pipe wall What is the shear force exerted by the oil on a 1m lo..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd