Determine the quality of the refrigerant at exit of valve

Assignment Help Mechanical Engineering

Reference no: EM13709657

Refrigerant 22 enters the valve of a refrigeration system with a pressure of 14 bars and a temperature of 32 C and exits at a pressure of 4 bars.

Neglecting heat transfer and any changes in potential and kinetic energy, determine the quality of the refrigerant at the exit of the valve.

Reference no: EM13709657

Questions Cloud

Brief description of guidelines related to diversification : List and discuss some guidelines for when related diversification would be a particularly good strategy to pursue and guidelines related to diversification in detail.

Determine temperature of the air at the outlet of the duct : A 1000 ft long metal duct is used to transport heated air from one side of a plant to another. The duct is 24in high by 36in wide. The heated air's temperature at the inlet of the duct is 170 F and the volumetric flow rate is 15,000 CFM. If the ambie..

Passes through an adiabatic valve in steady flow : Steam at 600 psia and 1000 F passes through an adiabatic valve in steady flow and exits at 14.7 psia. What is the state of the outlet stream? (Give Toutif the outlet is in a single phase region and x out if the outlet is in the two phase region).

Draw the circuit for an rcd snubber circuit : Calculate maximum conduction losses when operating at maximum current and a duty cycle of 5% and design a gate drive circuit.

Determine the quality of the refrigerant at exit of valve : Refrigerant 22 enters the valve of a refrigeration system with a pressure of 14 bars and a temperature of 32 C and exits at a pressure of 4 bars. Neglecting heat transfer and any changes in potential and kinetic energy, determine the quality of the r..

Explanation of riordan supply chain and operational design : Riordan Supply-Chain and Operational Design Analysis and Determine Riordan's manufacturing strategy (Chase, Level, or combination) and explain its benefits.

Wrench is used to loosen a bolt : A 20-centimeter wrench is used to loosen a bolt. The force is applied 0.20m from the bolt. It takes 50 new tons to loosen the bolt when the force is applied perpendicular to the wrench. How much force would it take if the force was applied at a 30-de..

Methane gas in piston-cylinder assembly goes under adiabatic : Methane gas in a piston-cylinder assembly goes under an adiabatic (no heat transfer) quasi- equilibrium compression. (This process is called isentropic process). The pressure and volume of the gas during the process are related as PV 1.3=constant.

Neglect kinetic and potential energy effects : A piston-cylinder assembly contains 2 lbm of water, initially at 100 lbf/in.2 and 400 F. The water undergoes two processes in series: a constant pressure process followed by a constant volume process. At the end of the constant volume process, the te..

User Account

All Pages