Design bridge that will withstand fully loaded semi-trailers

Assignment Help Civil Engineering
Reference no: EM13857124

Many bridge designs today contain simple geometrical components but are constructed into complex ways to ensure that relevant base and safety loads are catered for. Bridges are multimaterial solutions to withstand the static and dynamic loads that are exerted onto them.

This assignment consists of the following sections - all which must be addressed in your final report:

1. Design a bridge that will withstand 4 fully loaded semi-trailers (eg 2 going in each direction) at the central point, being aware of both static and dynamic loads, the span of the bridge will be 200 meters in length; width is whatever you determine it must be as suitable but limit yourself to two lanes.

2. Use a minimum of 2 materials and a maximum of 5 materials in your design, it can be any currently available material you choose, but you need to justify your selections.

3. You do not need to consider the connection of the bridge to ground, just assume a rigid stable connection.

4. In your report you need to include loading diagrams, stress analysis of at least 4 different sections of geometry using content developed through this subject plus other resources. 2 analysed sections must be where 2 materials are joining. As well as any engineering drawings that will be required to fully explain the joint.

5. This is a hand calculation based assignment thus no FEA will be accepted.

6. Keep geometry sections to simple, commercially available shapes.

7. All literature must be properly referenced.

Reference no: EM13857124

Previous Q& A

  What is the mean of the binomial distribution

Thirty-nine percent of U.S. adults think that the government should help fight childhood obesity. You randomly select six U.S. adults. What is the mean of the binomial distribution?

  An ideal monatomic gas in a volume undergoes

An ideal monatomic gas in a volume undergoes an adiabatic change from P1 = 8.2 × 105-Pa and V1 = 0.17-m3 to triple its initial volume. How much work is done on the gas?

  A light inextensible string fastened to a point

A light inextensible string fastened to a point in the ceiling passes under a smooth movable pulley of mass 5 kg, over a smooth fixed pulley and carries a 4 kg mass hanging freely. if the system released from rest, find the rising speed acquired by t..

  Analyze article on self-esteem and bullying people

Discuss in 150 + Words with in text citations - Analyze article on Self-Esteem and Bullying People with high self-esteem may believe they are above the law and can do anything they want. The following article provides a perspective on narcissism,..

  A source emits with intensity 10-5 watt

A source emits with intensity 10-5 watt / m2. If the threshold intensity is worth 10-12 watts / m2, set the sound intensity level

  Describe one limitation of the johnson cook empirical model

Describe one limitation of the Johnson Cook empirical model. Draw and label the phase diagram of carbon steel with up to 2.11% of carbon. Explain how to increase Martensite microstructure for hypo eutectoid steel.

  A penny and a quarter are lying side by side

A penny and a quarter are lying side by side at the bottom of a bucket of water.  Which coin experiences the greater downward force due to water pressure acting on it?

  Conceptual summary of the results

A description and results of each analysis- The descriptive statistics, The t-test or ANOVA, The bivariate correlations and A conceptual summary of the results, stating what they tell you about the data

  Determine the watts for each appliance

*List all electrical appliances in your house. ( Laptops, iPads, tvs, etched..) *Determine the watts for each applicance.

  By what height must a long jumper raise his centre

By what height must a long jumper raise his centre of mass when making a jump of 9m, if his horizontal velocity on take-off is 8ms-1?


Write a Review


Similar Q& A

  Determine what is the volume of the lake in cubic feet

Nitrification, the conversion of ammonia to nitrate (NH3 -> NO3-) occurs in the lake according to first - order kinetics. One stream feeds the lake and one stream empties the lake with the flow rate in both being 8 cfs

  What type of aquifer material do you expect in the location

The elevation of water in well A is 300m above sea level and well B is 350m above sea level. The wells are 45m apart. A dye test reveals that the specific discharge between the two wells is about 2.75m/day.

  Identify the minimum and maximum deflection and rope tension

Friction of the walker's shoes and rope are sufficient to cause the rope to have more tension on one side then the other. Neglecting the weight and any elastic deformations of the 20.1-m long rope, create a table using 1.0m increment for the range

  Qualitative or quantitative risk assessment on the project

Conduct either a qualitative or quantitative risk assessment on this project. Identify the risk factors that you consider most important for the suspension bridge construction. How would you assess the riskiness of the project? Why?

  What would the salt concentration be in the brine

A reverse osmosis plant desalinates 5X10^6 L/day of feedwater containing 1500 mg/L of salts, yielding 3X10^6 L/day of product water with 75 mg?l of salt. What would the salt concentration be in the brine?

  Calculate the max shear stress in each segment of the rod

The rod is fixed against rotation at its left end, but free to rotate in a bearing at its right end. Each disk is 300mm in diameter. Calculate the maximum shear stress in each segment of the rod.

  Determine the horizontal component of the average impulsive

The last segment of the triple jump tracxk and feild event is the jump, in which the athlete makes a final leap, landing in a sand filled pit. Assuming that the velcity of a 185 lb athlete just before landing is 30 ft/s at an angle of 35 degrees with..

  Calculate equivalent pipe size and flow in the pipe

The first pipe of 400mm diameter is 500 m long, the second pipe 600 m long, size 300mm, and the last pipe is 500m long of diameter 200mm. If the elevation difference between two reservoirs is 30m

  Determine the peak discharge that would result no ponds

Suppose a drainage basin has an area of 288 acres with a CN=55(Runoff Coef. of 0.30). Determine the peak discharge (in cfs) that would result from a 6.0in., 24-hr assuming there are no ponds and swampy areas.

  Determine the number of truck loads required to obtain

For construction of an embankment, the soil is transported from a borrowed area using a truck which carries 5.5 m^3 of soil at a time, with the following details: For the Borrowed Pit: bulk unit weight= 16 KN/m^3

  Consider a house into which radon is emitted through cracks

consider a house into which radon is emitted through cracks in the basement. the total volume of the house is 650 m3

  Thermo-gravimetry of calcium oxalate1 evaluate the percent

thermo-gravimetry of calcium oxalate1. evaluate the percent mass loss for each of the three thermal events indicated

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd