Changes in kinetic and potential energies are negligible

Assignment Help Mechanical Engineering
Reference no: EM13709619

Air is compressed steadily in a compressor from 100kPa and 300 K to 1 Mpa and 500 K. The compressor is not well insulated and a heat loss of 40 KJ/kg occurs during the process. Assuming the changes in kinetic and potential energies are negligible, determine the specific work input to the compressor, in kj/kg.

Reference no: EM13709619

Questions Cloud

Heat transfer coefficient between the sodium and the plate : Molten sodium metal is often used as a coolant in nuclear reactors. Consider molten sodium at 205 C flowing at a rate of 0.23 m/s over a plate with length and width of 1 m and 2 m, respectively.
Air flows through a pipe with a variable diameter : Air flows through a pipe with a variable diameter at a constant volumetric flow rate of 0.5 m^3/s. Assuming the velocity profiles are uniform throughout use mass conservation to find the velocity where the diameter is 0.4m and 0.2m
Many uses including the production of sulfuric acid : SO3 has many uses including the production of sulfuric acid (H2SO4). A gas stream having the (molar) composition shown in the figure below is to be passed through a two-stage converter. The fractional conversion of SO2 to SO3 (per single pass) in the..
Determine the maximum speed reached by the mass : An electric hoist consumes 5 kW of power at a constant rate to lift a 500-kg mass. Assuming that the hoist is 80% efficient, determine the maximum speed reached by the mass.
Changes in kinetic and potential energies are negligible : Air is compressed steadily in a compressor from 100kPa and 300 K to 1 Mpa and 500 K. The compressor is not well insulated and a heat loss of 40 KJ/kg occurs during the process. Assuming the changes in kinetic and potential energies are negligible, de..
Monthly payment if the mortgage is to be paid off : You are buying a home for $360000. If you make a down payment of $60000 ad take out a mortgage on the rest at 8.5% compounded monthly, what will be your monthly payment if the mortgage is to be paid off in 15 years?
Room is heated by a base-board resistance heater : Room is heated by a base-board resistance heater, which is designed to heat the air in this room from 8oC to 27 oC within 20 min. Approximating the room as a thermo-insulated cuboid 15m ? 10m ? 5m and assuming the specific heats to be constant at a r..
Yield strength for alloy that has average grain diameter : The yield strength for an alloy that has an average grain diameter of 4.4 x 10-2 mm is 115 MPa. At a grain diameter of 7.1 x 10-3 mm, the yield strength increases to 258 MPa. At what grain diameter, in mm, will the yield strength be 237 MPa?
Brass is higher than recrystallization temperature of copper : According to the Hall-Petch equation, Ostwald ripening follows the empirical rule. The recrystallization temperature of brass is higher than the recrystallization temperature of copper. The recrystallization temperature of bronze is lower than the re..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the power required-in watts to compress the spring

The force F required to compress a spring a distance x is given by F - Fo = kx where k is the spring constant and Fo is the preload. Determine the work required to compress a spring, whose spring constant is k = 37 kN/m, a distance of 2 cm starting f..

  Determine the specific volume of the saturated vapor at the

a rigid tank contains a two-phase mixture consisting of 0.2 lb of liquid water and 0.1 lb of water vapor initially at a

  What would be the final temperature of an average natural

what would be the final temperature of an average natural gas at 320of when the pressure is dropped from 3000 to 1800

  Determine the work and heat transfer

A mixture of H2O 67.5% liquid and 32.5% vapor is in a closed, rigid container at 4 bar. The water is heated to 400 oC, determine the work and heat transfer, in kJ

  Tests reveal that a normal driver takes about 075 seconds

tests reveal that a normal driver takes about 0.75 seconds before he or she can react to a situation to avoid a

  Determine the torque that can be applied to a solid

assuming that the solid shaft has been replaced by a hollow shaft of the same cross-sectional area and with an inner diameter equal to half of its own outer diameter.

  What is the local heat transfer coefficient

A flat plate maintained at a temperature of 50 C experiences a flow of atmospheric air at 15 C. If the temperature gradient at the plate's surface at a given downstream location is -43 C/mm, what is the local heat transfer coefficient?

  Saturated vapor at 400 kia flowing in a line is taken out

saturated vapor at 400 kia flowing in a line is taken out through a valve to 100 kpa. what is the temperature in c as

  What equivalence ratio for octane-air mixtures

At what equivalence ratio for octane-air mixtures does the carbon to oxygen ratio of the system equal one? Why is this of interest?

  What is differential levelling

What is differential levelling? list the procedure for carrying out a differential levelling exercise where one point is beyond the range of the instrement . 100 word limit

  Diameter alloy rod has elongated-diameter has been reduced

At the proportional limit, a 1.5-in. gage length of a 0.375-in.-diameter alloy rod has elongated 0.0081 in. and the diameter has been reduced 0.00071 in. The total tension force on the rod was 5.62 kips.

  Determine the rate at which energy is removed by heat

the refrigerator steadily receives a power input of .15kw while rejecting energy by heat transfer to the surroundings

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd