Calculate the absolute pressure head and the gage pressure

Assignment Help Civil Engineering
Reference no: EM13308311

The pressure in the steam condenser of a nuclear power plant is 1 psia. Calculate the absolute pressure head, the gage pressure, the gage pressure head, the vacuum pressure, and the vacuum pressure head under standard conditions.

Reference no: EM13308311

Questions Cloud

What is the average magnitude of the force on the ball : A force in the negative direction of an x axis is applied for 27 ms to a 0.24 kg ball initially moving at 16 m/s in the positive direction of the axis. The force varies in magnitude, and the impulse has magnitude 45.1 N s.
What are the dimensions of such a cylinder : A cylinder is inscribed in a right circular cone of height 2.5, What are the dimensions of such a cylinder which has maximum volume
Determine the magnitude and direction of the resultant force : determine the magnitude of the resultant force and its direction, measured counterclockwise from the positive axis. The other force is F=700N with a 15 degree angle to the x-axis.
Describe a pipelined datapath needed to support : Describe a pipelined datapath needed to support the following instruction. Also specify the values of control signals using the diagram in the text book.
Calculate the absolute pressure head and the gage pressure : The pressure in the steam condenser of a nuclear power plant is 1 psia. Calculate the absolute pressure head, the gage pressure, the gage pressure head, the vacuum pressure, and the vacuum pressure head under standard conditions.
Estimate the final dbm value for a radio : Estimate the final dBm value for a radio if the radio has .1 Watt of power, if there is a 4:1 amplifier before transmission, and if there is attenuation to 1/8 the original signal strength between the sender and receiver.
Convert number f(t) decaying each minute to the number r(t) : Radioactive carbon 11 has a decay rate k of 0.0338 per minute-that is, a particular C11 atom has a 3.38% chance of decaying in any one minute. Suppose we start with 100 such atoms.
What is the percentage change in the specific weight : At a depth of 4 miles in the ocean the ppressure is 9520 psia. Assume that the specific weight at the surface is 64.0 lb/ft^3 and that the average volume modulus is 320000psi for the pressure range.
How to determine maximum positive factored design moments : How to determine maximum positive and maximum negative factored design moments at a certain point

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the range from the sv to the rec in gps

determine the range from the SV to the REC in GPS; using codes C/A and P and also waves (L1 and L2). How does two of the below from the list have an effect on the codes and waves

  How many gallons of water are contained in the tank

Develop a table that shows: 1) How many gallons of water are contained in the tank if the volume is measured in increments of 1 ft from the bottom to the top. 2) The mass of water at each increment, expressed in lbm.

  Find the flow rate in m3 per s when water flows uniformly

Water flows uniformly in a 6 m wide rectangular channel at a depth of 0.8m. The channel slope is 0.0015 and n=0.014. Find the flow rate in m3/s

  Find which is less than the maximum taxable wage base

Find an equation that expresses the relationship between the wages earned (x) and the Social Security taxes paid (y) by an employee who earns less than the maximum taxable wage base.

  Find the absolute pressure when the barometer reads

determine the preassure in psi at a depth of 20 ft below the free surface of a body of water and find the absolute pressure when the barometer reads 29.9 inches of mercury.

  Explain whether the project is economically stable

Additional cost at the end of year 1 = $50,000. Benefit at the end of year 1 = $0. Annual benefits at the end of Years 2-10 = $20,000. Interest Rate = 7%. Conventionally B/C ratio and wheter the project is economically stable.

  Calculate the upward acceleration of the particle

A particle of mass 200kg is lifted up vertically by a force of 104N. Assuming the acceleration due to gravity is 10meterper.secondsquare, write a program to calculate the upward acceleration of the particle.

  Determine the pressure at a closed valve attached to tank

In a certain chemical plant, a closed tank contains ethyl alcohol to a depth of 50 ft. Air at a pressure of 25 psi fills the gap at the top of the tank. Determine the pressure at a closed valve attached to the tank 10 ft above its bottom.

  Determine temperature increase that will close initial gap

An aluminum rod (1) (E=80 GPa, d=24.5 x 10-6/oC) and a brass rod (2) (E=115 GPa, d=22.0 x 10-6/oC) are connected to rigid supports. The cross-sectional areas of rod (1) and (2) are 4,000 mm2 and 5,000 mm2

  Determine the maximum altitude reached by the rocket

A powered model rocket is launched in the vertical direction. The altitude of the rocket is 100FT (above ground level) at the end of the powered portion of the flight. The rocket lands 19.676 seconds from the powered portion of the flight.

  Determining equivalency factor of single axle

The weights on the same axles when the truck is empty and leaving the power plant are 10 kips, 12 kips, and 8 kips, respectively. A two lane road is to be designed to serve the power plant and to last for a period of 10 years. a) What is the equiv..

  Determine the ratio k of the tension in the remaining wire

The small sphere of mass (m) is suspended initially at rest by the two wires. If one wire is suddenly cut, determine the ratio (k) of the tension in the remaining wire immediately after the other wire is cut to the initial equilibrium tension.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd