Calculate as many principal or maximum strains

Assignment Help Civil Engineering
Reference no: EM13326373

a point within an elastic body was subjected to a system of plane stress. strain gauges were used to measure that would allow for the calculation of principal strain and stress values at that point.with the given information:

the direct strain at an angle of 30o,to one of theprincipal axes was 1.34x10-3 and the corresponding shearstrain was 8.52x10-4. Calculate as many principal ormaximum strains at the point

Reference no: EM13326373

Questions Cloud

What is theaverage gpd flow to the stabilizaiton pond : A stabilization pond is designed for a 35-day detention time. If the pond is maintained at a capacity of 40 acre-feet, what is theaverage gpd flow to the stabilizaiton pond
Calculate the deflection angle from the tangent at the pc : The P.C. of a 3 degree curve, whose degree is based on a chord of100 ft. arc, is at Sta. 19+39.60 and the P.T is at Sta. 25+64.60. Calculate the deflection angle from the tangent at the P.C
How much work is required to move the block : The block in the figure is initially at rest on an inclined plane at the equilibrium position that it would have if there were no friction between the block and the plane
What is the value of the spring constant : A block of mass m = 300 g is released from rest and slides down a frictionless track of height h = 70.6 cm. What is the value of the spring constant k
Calculate as many principal or maximum strains : a point within an elastic body was subjected to a system of planestress. strain gauges were used to measure that would allow for thecalculation of principal strain and stress values at that point.with the given information
Calculate the force between the earth and the sun : mass of the earth is 5.97x10^24 kg. the radius of its orbit around the sun is 1.50x10^11m. calculate the force between the earth and the sun
What is the speed of the cube : An ice cube slides from rest without friction down a long inclined ramp that makes an angle of 35.8 o with the horizontal. What is the speed of the cube
Compute the stations of the pc and pt for each curve : An 1100 ft. straight line route survey, which had PI's at3+81.27 (I = 12o30') and 5+42.30 (I = 10o56'), laterhad 600 ft radius simple curves inserted at each PI. Computethe following: a)Curve data for each curve: Da, T, L, LC, E, and MO
What is the average velocity for the trip : A car travels east at 77 km/h for 6.0 h. It then travels 40.0° east of north at 112 km/h for 6.0 h. What is the average velocity for the trip

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the thickness in mm of the paint on the wall

one gallon of paint(volume=3.78 x 10^ -3) covers an area of 25 m^2. what is the thickness in mm. of the paint on the wall

  Determine what is the max distance between inlets

A suburban street receives storm water runoff at a rate of 2.0 L/m-s (one each side). the street has a slope of .8 percent and a cross slope of 2 percent, n = .013.

  Determine what will be the total settlement of a laboratory

The settlement of a laboratory 10-cm thick consolidation specimen is 5 mm in 1 hour with a coefficient of consolidation of 0.005cm2/s. What will be the total settlement

  Hydraulic radius of the river

In that season, what are the hydraulic radius of the river, its mean velocity and volumetric discharge?

  Determine the tensions in the cables and the reactions

The suspended load exerts a force F = 600 lb at A and bar OA weighs 200 lb. Assume that the bar's weight acts at its midpoint. Determine the tensions in the cables and the reactions at the ball and socket support O.

  Estimate the velocity with which would contact the ground

estimate the velocity with which you would contact the ground if you jumped from an airplane at an altitude of 500ft and a) air resistance is negligible, b) air resistance is important, but you forgot your parachute

  Draw the 5 stress-elements using the natural orientations

Consider the simply supported beam that has one external load applied to it. At a cross- section that cuts through the carriage bolt, there are 5 points at which the states of stress must be identified.

  What is the maximum horsepower that the system can produce

A ssume that one half of the energy incident on the collector goes to this reservoir, which, in turn, serves as a source for a heat engine. If the temperature of the atmosphere is 70 F,

  What is equivalent height of water column for pressure

Tall buildings can develop a significant difference in pressure between the inside and the outside of the building. Air lock entrances are used at the ground level so the pressure at the ground floor is not the same as atmospheric pressure.

  Alternative water resource projects

Consider two alternative water resource projects, A and B. Project A will cost $2,533,000 and will return $1,000,000 at the end of 5 years and $4,000,000 at the end of 10 years.

  What is the concentration of cod in the effluent

The maximum specific growth rate of the organisms driving this reaction is 5.0 days -1 and the growth rate is 0.54 day-1. The activated sludge tank has a volume of 40 m3 and the flow rate into it is 400 m3/day.

  Determine the elevation and stationing of the low point

A 1400-ft-long sag vertical curve (equal tangent)has a PVC at station 115 + 00 and elevation 750 ft. The initial grade is -3.5% and the final grade is +6.5%. Determine the elevation and stationing of the low point, PVI, and PVT

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd