What is the diameter d of the smallest-sized particles

Assignment Help Civil Engineering
Reference no: EM13315422

In a hydrometer test, the data recorded at 60 minutes after the start of the test are as follows: Gs = 2.6, temperature of water T = 24°C and L = 9.2 cm. What is the diameter D of the smallest-sized particles that have settled beyond the zone of measurement at that time?

Reference no: EM13315422

Questions Cloud

How many watts of power would it take to heat 1 l of water : How many watts of power would it take to heat 1 L of water(weighing 1.0 kg) by 10 degrees Celsius n 1.0 h Assume no heat losses occur, so all of the energy expneded goes into heating the water.
What distance on 5 grade should be laid out with a tape : What distance on 5% grade should be laid out with a tape that measures 30.010 m under field conditions if the horizontal distance is to be 430.00m
What measurements should be laid out to establish a distance : a tape is calibrated and found to measure 100.04ft between the 0- and 100-ft marks. what measurements should be laid out to establish a horizontal distance of 682.25ft
Find the time interval between wave peaks hitting the boat : Suppose you are in a high-speed boat moving at 18.0 m/s directly into approaching 1.10 m wavelength wave. What is the time interval between wave peaks hitting the boat
What is the diameter d of the smallest-sized particles : In a hydrometer test, the data recorded at 60 minutes after the start of the test are as follows: Gs = 2.6, temperature of water T = 24°C and L = 9.2 cm. What is the diameter D of the smallest-sized particles
What is the phase constant of the other wave : Two sinusoidal waves of the same period, with amplitudes of 5.5 and 7.5 mm, travel in the same direction along a stretched string; What is the phase constant of the other wave
What fraction of the total energy is potential energy : When the displacement in SHM is 0.4 the amplitude A, what fraction of the total energy is kinetic energy, What fraction of the total energy is potential energy
Over what time interval does the proton reach this speed : A proton accelerates from rest in a uniform electric field of 625 N/C. At one later moment, its speed is 1.25E+06 m/s. Over what time interval does the proton reach this speed
Implement a method to delete every node from your bst : Implement a method to delete every node from your BST that contains a word that is 3 or fewer letters long (note that you must explicitly make these deletions, not fail to insert these words in the first place).

Reviews

Write a Review

Civil Engineering Questions & Answers

  What flow rate does the filter handle during production

A rapid sand filter has a loading rate of 8.00 m/h, surface dimension of 10m x 8m, an effective filtration rate of 7.70 m/h, and a production efficiency of 96 percent.

  Determine time required for the bed to complete a full cycle

The velocity of the bed is limited to a maximum value of 150mm/s to the right and 300mm/s to the left; the acceleration is successively equal to 150mm/s^2 to the right, zero 150 mm/s^2 to the left, zero, etc.

  What should be the proportion of the volume of the steel

suppose a steel material of specific gravity of 7.8 is attached to a wood of specific gravity 0.8. if it is required that the material does not sink or rise when left in static water, what should be the proportion of the volume of the steel to tha..

  Determine the time in seconds to obtain a density

The salt water mixes thoroughly with the fresh water and the mixture overflows out of the tank. If the flow rate out of the tank is 60 liters/minute. Assume freshwater is 1000 kg/m^3, and the salty water is 1020 kg/m^3.

  Calculate the maximum shear and indicate in terms of x

a. Determine the shear and moment diagram. b. Calculate the maximum normal stress on the top of the beam, on the bottom of the beam and indicate in terms of x its location.

  Determine the location of the deepest point of the curve

The elevation of the curve at its deepest point must be at elevation 168.00 feet or higher to clear a major pipe installation. If the PVC is at station 0+00 with an elevation of 176.20 feet, determine the location of the deepest point of the curve..

  Design a portland cement concrete mix for a loading clock

Design a Portland cement concrete mix for a loading dock driveway slab. The concrete will be exposed to deicing chemicals and subjected to freezing and thawing in a moist condition. This is severe environmental exposure.

  Calculate earth gravitational force

Calculate Earth's gravitational force on the Shuttle astronauts while orbiting at an altitude of 220 miles (or 354 km) above Earth's surface.

  Find pipe diameter if it is to be full with steady rainfall

Rainwater runoff from a 200 x 500 ft parking lot is to drain through a circular concrete pipe that is laid on a slope of 5 ft/mi. Determine the pipe diameter if it is to be full with a steady rainfall of 1.5 in/hr

  What is chemical name of first hazardous air pollutant

What is the chemical name of the first hazardous air pollutant under Title III regarding the Clean Air Act

  Determine the critical path-starting and finishing times

Activity Description Duration Immediate Predecessors ST Start milestone - Activity Description duration Inmdiate predesesor ST Start milestone - - A excavate st. 1 4 ST B Order & steel del. work 7 ST C Formwork st.

  Calculate the force of water hitting a concrete cylindrical

How do you calculate the force of water hitting a concrete cylindrical pole. The velocity of the water is 2 ft/s, the depth of the water is 10 ft, and diameter of the pole is 3 ft. So what would be the total force exerted on the pole by the water?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd