What is the conversion for a 300 k operating temperature

Assignment Help Chemical Engineering
Reference no: EM131244824

The reversible, first-order reaction shown below takes place in a CSTR.

1318_e60865a0-9b4d-4a73-838e-06a05a574138.png

The following data are known:

(a) For a reactor space time of 10 min, what is the conversion for a 300 K operating temperature? What is the conversion at 500 K? (Remember: the equilibrium constant depends on temperature.)

(b) If the feed temperature is 330 K and the feed concentration is 5 M, what is the necessary heat-removal rate per liter of reactor volume to maintain a 300 K operating temperature?

163_45e4d736-fa07-41e8-a395-49d2acd2ea59.png

Reference no: EM131244824

Questions Cloud

Print the operating point for the main transistors : ECE 511: Analog Integrated Circuits Assignment. Print the operating point for the main transistors in the amplifier (diff-pair, tail-current transistor(s). In this print-out, highlight the gm, gds, vdsat, cgs, cgd, cdb, and csb capacitances (note t..
Consumer-worker values two things-consumption good-leisure : Suppose the consumer/worker values two things: a consumption good C and leisure: Suppose that there are 24 hours in a day and the consumer/worker has a utility function U (C; `) = C0:5`0:5: How is this problem different from the standard utility maxi..
Proof read the given paper : Proof read the given paper. Check the paper for grammar. - The objective of this assignment is to Exploratory Data Analysis (EDA) using Watson Analytics.
Identify the critical infrastructure sectors : Identify the Critical Infrastructure Sectors. Choose three of the Sectors and discuss why a certain government agency was identified as the lead agency for that sector. Also discuss what other government agencies you believe should have been inc..
What is the conversion for a 300 k operating temperature : For a reactor space time of 10 min, what is the conversion for a 300 K operating temperature? What is the conversion at 500 K? (Remember: the equilibrium constant depends on temperature.)
What do you think about the notion presented by terris : What do you think about the notion presented by Terris that Lockheed's ethics program does little to prevent ethical breaches at the highest level of the organization?
Write down an expression for the monopolists profit : Suppose a monopolist faces a demand curve for its output of P = 300−Q. This means that the marginal revenue curve of the monopolist is M R = 300 − 2Q. Assume that the marginal cost of production is constant and equal to $40. Write down an expression ..
How much error is introduced by making this change : Calculate the exit temperature and τ for the PFR described in Example 9.4.2 when mole change with reaction is ignored (i.e., εB = 0). How much error is introduced by making this change?
Strategic decision making and enterprise performance : What can you learn by engaging in an environmental scan that can influence strategic decision making and enterprise performance?

Reviews

Write a Review

Chemical Engineering Questions & Answers

  What amount of heat is necessary to synthesize no2(g)

If 2.50  102 mL of N2(g) at 100.C and 3.50 atm and 4.50  102 mL of O2(g) at 100.C and 3.50 atm are mixed, what amount of heat is necessary to synthesize NO2(g)?

  Write the normal equations for this case

Are the values of ak from part (c) what you would expect for this signal? Justify your answer clearly. (f) Suppose you wish to model the signal now with p = 3. Write the normal equations for this case.

  Are there differences with other biomaterial based products

Describe the major technical areas involved in engineering a new biomaterial such as a contact lens. Are there differences with other biomaterial based products?

  What is the temperature of stream c

A flow process that operates with steam has one inlet stream (A) and two outlet streams (B and C). Stream A is at 20 bar, 25 °C, and has a mass flow rate of 10 kg/s; stream B is saturated liquid at 20 bar and has a flow rate of 7 kg/s; stream C is..

  Design a double-pipe exchanger for this duty

A solution of sodium hydroxide leaves a dissolver at 80ŽC and is to be cooledto 40ŽC, using cooling water.

  Aqueous solution of aluminum sulfate

The slurry effluent from the reactor (digester), consisting of solid inert material from the ore and an aqueous solution of aluminum sulfate is then fed to a three-stage, countercurrent washing unit to separate the aqueous aluminum sulfate from th..

  Write comprehensive report on discerption of corrosion form

Write a comprehensive report on your selection of the form of corrosion - Discerption of the corrosion form.

  Prove that the equilibrium state is univariant

A low-pressure, gas-phase isomerization reaction, AB, occurs at conditions such that vapor and liquid phases are present.

  Calculate the magnetic flux in the core

Now suppose a 10-mm air gap is cut across the toroid. Determine the current that must be supplied to the coil to produce the same value of magnetic flux density as in part (a). You may neglect leakage and fringing.

  Explain introduced to a hazardous waste reactor

A waste with a concentration of 0.1 gram per liter is to be introduced to a hazardous waste reactor that is to achieve 90% destruction. A reactant

  Estimate the power of the pump

The length of the pipe line =305 m. The efficiency of the pump is 40 % and includes the losses at the entrance and exit of the pump. if the flow rate of the water is to be maintained at 3.15*10^-3 m3/s. and the water temperature at 16 oc . ,estima..

  Design constraints for one parallel cyclone configuration

Show calculation details, explanation of assumptions and design constraints for one parallel cyclone configuration, oneseries cyclone configurationand the ESP only.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd