What is the composition of the solution formed

Assignment Help Chemical Engineering
Reference no: EM131194307

An LiClIfiO solution at 298.15 K (25°C) is made by adiabatically mixing cool water at 283.15 K (10°C) with a 20-mol-% LiC1/H20 solution at 298.15 K (25°C). What is the composition of the solution formed?

Reference no: EM131194307

Questions Cloud

Write a paper on coal miners have suffered severe accidents : In your paper, you should discuss the following:- • The mining industry- • The accidents you read about-• How was safety ensured before the accidents; how is safety ensured now.
What is the heat effect per mole of solution : If LiC1.2H2O(s) and H20(1) are mixed isothermally at 298.15 K (25°C) to form a solution containing 10 mol of water for each mole of LiC1, what is the heat effect per mole of solution?
State the topic you have selected for your advocacy report : State the topic you have selected for your advocacy report. State the name of the organization for which you will be writing your report.
Organizations like opportunity international : Explain what Adam Smith meant when he wrote about the Wealth of Nations. Why is there a need for organizations like Opportunity International? Can't poor people get loans from banks and other sources? Identify the four major requirements necessary ..
What is the composition of the solution formed : An LiClIfiO solution at 298.15 K (25°C) is made by adiabatically mixing cool water at 283.15 K (10°C) with a 20-mol-% LiC1/H20 solution at 298.15 K (25°C). What is the composition of the solution formed?
Highest levels of sport competition : In the ESPN 30 for 30 documentary Run Ricky Run, we see Ricky Williams pursue the highest levels of sport competition at UT and in the NFL and the highest levels as a Yogi.
What is the heat effect : A liquid solution of LiCl in water at 298.15 K (25°C) contains 1 mol of LiCl and 7 mol of water. If 1 mol of LiCl.3H20(s) is dissolved isothermally in this solution, what is the heat effect?
Decision-making process for employees : Does anyone have a three to five page document on describing a decision-making process for employees with two different strengths? Determine how the process might be approached differently for each employee to produce the best results, use scenar..
Importance of gastronomy as a tourism product : Importance of gastronomy as a tourism product - use any two site visit experiences to discuss how these visits have contributed to your understanding of gastronomy as a tourism product

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Heat transfer problems

HEAT TRANSFER PROBLEMS NO16- Water flowing in a steel pipe of diameter 0.02 m is to be cooled from 40 to 30 oc . The velocity of water in the steel pipe is 1.5 m/s .

  What is the final temperature of the mixture

A liter of gas, initially at a pressure of 500Pa, is compressed from 1.00 L to 0.25 L. During the compression process, heat is dissipated to maintain a constant temperature. What is the final pressure?

  What are the composition of the liquid and the amounts

A mixture of heptane/decane at 1.8 bar, 120 °C contains 80% by mol heptane. At what pressure should it be flashed to obtain a stream that is 90% rich in heptane? What are the composition of the liquid and the amounts of the two phases?

  Find allowable axial compressive load using euler formula

A W12x22 structural steel wide-flange section of ASTM A36 steel is used as an axially loaded column. Find the allowable axial compressive load using Euler's formula and a factor of safety of 2.0. The column is pin connected at both ends and is 15 ..

  Estimate the composition of the liquid

Use Raoult's law to estimate the composition of the liquid and the system temperature.

  Find the implied adsorption isotherm

Find the implied adsorption isotherm, and show under what conditions it reduces to the Langmuir isotherm.

  Electron configuration of elemental bohrium

If 199 atoms of bohrium-267 could be synthesized, how much time would elapse before only 11 atoms of bohrium-267 remain? What is the expected electron configuration of elemental bohrium?

  Design the manufacture of ferrous sulphate monohydrate

Design the manufacture of (tones/day) Ferrous sulphate monohydrate from waste pickle liquor. Pickling is generally associated with the removal of scale with mineral acid. Sulphuric acid is the most commonly used pickling acid.

  How can a metal be modified to become black

What can be done to mitigate the effect of tunnelling across gate oxides in integrated microelectronics?

  Suitable materials of construction for reactor

Aniline is manufactured by the hydrogenation of nitrobenzene in a fluidized bed reactor. The reactor operates at 250 °C and 20 bar. The reactor vessel is approximately 3 m diameter and 9 m high. Suggest suitable materials of construction for this ..

  What mass of na2cro4 is required to precipitate silver ions

In addition, what volume of 0.100 M Na3PO4 is required to precipitate all the lead(II) ions from 150.0 mL of 0.250 M Pb(NO3)2? Explain how you arrived at your answer, and show all of your work.

  The combustion of hydrogen and in the moisture

When burnt , the flue gas issuing out of the furnace at 545 oc analyses on dry basis as CO2 =14.5 % , O2 = 4.7%, N2 = 80.8 % , Other relevant data are- Gross C.V. of coal =28000 kj /kg , ambient temperature = 15oc

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd