The flow around a model of a turbine blade is investigated

Assignment Help Mechanical Engineering

Reference no: EM13713143

The flow around a model of a turbine blade is investigated. The model is five times larger than the prototype. A maximum pressure of 4 psi is measured at the leading edge, a maximum velocity of fps is measured near the top of the blade, and a small device attached to the surface measures a shear stress of 0.02 psi at a particular location. Determine the associated quantities to be expected on the prototype if water is the fluid for both cases.

Reference no: EM13713143

Questions Cloud

Determine at steady state the power input to the compressor : Refrigerant 134a enters a compressor operating at steady state as saturated vapor at 0.12 MPa and exits at 1.2 MPa and 708C at a mass flow rate of 0.108 kg/ s. As the refrigerant passes through the compressor, heat transfer to the surroundings occurs..

Undergoes a process in a closed system until its pressure : Carbon dioxide initially at 50 kPa, 400 K, undergoes a process in a closed system until its pressure and temperatures are 2 MPa and 800 K, respectively. Assuming ideal gas behavior, find the entropy change of the carbon dioxide (Cp = 1.054 kJ/kg.K)

Transferred heat and final pressure and change in entropy : Dry air is contained in a tank wit fixed volume at 200oC and a pressure of 5 bar. Then the fluid is heated so that its temperature reaches up to 300oC. If the volume of the tank is 0.2 m3, find the transferred heat and final pressure and the change i..

Find the transferred heat and the change in entropy : 1 kg of air is polytropically compressed reversibly from 5 bar to 10 bar from an initial temperature of 300°C. Find the transferred heat and the change in entropy. Take the polytropic index as 1.25.

The flow around a model of a turbine blade is investigated : The flow around a model of a turbine blade is investigated. The model is five times larger than the prototype. A maximum pressure of 4 psi is measured at the leading edge, a maximum velocity of fps is measured near the top of the blade, and a small d..

Frictionless piston-cylinder device is at a state : Three kg of saturated R-134a inside frictionless piston-cylinder device is at a state (state 1) such that the piston is not moving (equilibrium). The atmospheric pressure around the device is 99.4 kPa and the mass of piston is 2.45 kg. The volume of ..

Frictionless piston undergoes a polytrophic process : Air (ideal gas) inside a cylinder filled with a frictionless piston undergoes a polytrophic process having an exponent n = 1.33. The initial pressure of the air is 3.34 MPa and the T (final) is 750 K and during the process the volume of the air is in..

Load is needed to generate a transverse center displacement : What load is needed to generate a transverse center displacement of 5 mm for an aluminium beam of 15 cm length, 2 cm width and 2 mm thickness (in three-point bending). Determine what strain you expect at the bottom surface for this deflection for Al ..

Determine the tension in the cables de and bc : Determine the tension in the cables DE and BC and the components of reaction of the smooth collar at A. The sign weighs 75 lb.

User Account

All Pages