Provide zero-air voids curve for the soil on the same plot

Assignment Help Civil Engineering
Reference no: EM13320162

A standard proctor test is performed on a soil. The data is given below. Provide the following information:

a) Density plot, locating γd(max) and ω opt on the plot
b) Zero-air voids curve for the soil on the same plot
c) Curve representing S = 70%

γ (pcf) ω(%)
120.3 12

124.2 14

123.6 16

120.3 18

Reference no: EM13320162

Questions Cloud

Determine the time it takes the block to reach position b : The initial velocity of the brick in position A is 40 ft/s. If the coefficient of kinetic friction between the block and the plate is .40, determine the time it takes the block to reach position b on the horizontal axis.
At what speed are you driving : The suspension system of your 1200 kg car has a natural oscillation frequency of 2.00 Hz without functioning shock absorbers. At what speed are you driving
Determine which soil is the cheaper purchase for the site : A contractor wants to build a fill at his new construction site. He has two options for purchasing his borrow material. Site A has a soil with a unit weight of 2.5 kN/m3, a moisture content of 14% and a cost of $8 per cubic meter
What is the compton scattering angle : A 200 keV electron strikes a copper target and is brought to rest producing a single X-ray photon. What is the Compton scattering angle relative to the direction of the incident X-ray
Provide zero-air voids curve for the soil on the same plot : a) Density plot, locating γd(max) and ω opt on the plot b) Zero-air voids curve for the soil on the same plotc) Curve representing S = 70%
Find the final speed of the less massive particle : A head-on, elastic collision between two particles with equal initial speed vleaves the more massive particle (massm1) at rest. Find the final speed of the less massive particle
What is the torque on the loop : A circular loop carrying a current of 1.0A is oriented in a magnetic field of 0.35 T. What is the torque on the loop when its plane is oriented at a 25 degree angle to the field
How to assume a weight od 150 pcf for reinforced concrete : it carries a uniform service load of 2450 lb/ft in addition to its own weight. material strengths are f'c=4000psi and fy=60000psi .assume a weight od 150 pcf for reinforced concrete.
Estimate the amplitude of the wave : A sinusoidal wave travels along a stretched string. A particle on the string has a maximum velocity of 0.900m/s, What is the amplitude of the wave

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the maximum compression of the spring mounted

The 30-Mg freight car A and 20-Mg freight car are moving towards each other with the velocities of VA= 20km/h and VB=10 km/h. A spring mounted on A has k=3 MN/m Determine the maximum compression of the spring mounted on car A.

  Determine what is ph of the solution at equilibrium

Calcium sulfate (CaSO4, solubility product Ksp=2*10^-5 M^2), is added to initially pure water, such that solid CaSO4 remains at equilibrium. (Assume the sulfate does not participate in reaction other than the solubility product; no HSO4- formed).

  Explain how to describe the operation of series rl circuit

The discussion must address phase angle relationships of current and voltage. The answer must include the effect of source frequency on the voltage drops across the resistor and the inductor at very low and very high frequency values.

  Determine the plane strain fracture toughness of the polymer

A polymer that contains internal flaws 1.5 mm in length fails at a stress of 30 MPa. Determine the plane strain fracture toughness of the polymer. Assume a polymer specimen of "infinite" width.

  Transportation and management

In the construction management, there is a lot of procurement route that are necessary and suitable for the construction industry.

  Determine the elevation and stationing of the low point

A 1400-ft-long sag vertical curve (equal tangent)has a PVC at station 115 + 00 and elevation 750 ft. The initial grade is -3.5% and the final grade is +6.5%. Determine the elevation and stationing of the low point, PVI, and PVT

  Do any of the three viscoelastic models comes closet

The faster you try to open a screen door, the more resistance you encounter. When the door is released, the length of the closer decreases linearly with time until it returns to its intial length. Do any of the three viscoelastic models

  Design torsion reinforcement in rectangular and flanged beam

Write a user friendly computer program to design torsion reinforcement in rectangular and flanged beams, and plot the cross-sectional reinforcement details on a graphic plotter

  Determine the amount of garbage produced in the city

A city with 28,000 percent population is planning solid waste program. Population growth in the city is estimated to be 2.2% annually and the planning will designed for 30 years, The dumping area is located 20km away from the city.

  Determine the constant angular deceleration

A tub of a washing machine is rotating at 50 rad/s when the power is turned off. If it takes 15s for the tub to come to rest, determine (a) the constant angular deceleration, and (b) the total number of revolutions the tub makes.

  What is the concentration of phenol vapor in the exhaust

A plastic-manufacturing plant emits 1,700 scfm of exhaust at 200oC and 90 kPa. The exhaust (consisting of mostly air) contains 9 ppm phenol vapor (C6H5OH). What is the concentration of phenol vapor in the exhaust in µg/L

  How many moles of aluminum

How many moles of aluminum do 5.2×1024 aluminum atoms represent?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd