Measured with a digital data acquisition system

Assignment Help Mechanical Engineering
Reference no: EM13709152

A voltage signal is produced by a transducer.  The signal contains its strongest frequency component at 50 Hz (amplitude = 5.0 V), plus a weaker component at the second harmonic (100 Hz) with amplitude 2.0 V. In addition, there is noise at 60 Hz with amplitude 0.50 V, and some overall low-amplitude background noise at all frequencies. The voltage signal is measured with a digital data acquisition system. The sampling frequency is 80 Hz.

a) Sketch the frequency spectrum that would be generated under these conditions. Be careful to add numbers to the frequency scale and voltage scale, and label each spike in the spectrum, explaining the origin of each spike.

b) If a 6th-order low-pass Butterworth filter is used to attenuate the 100 Hz component, with a cut off frequency of 60 Hz, by how many dB will the 100 Hz component be attenuated?

Reference no: EM13709152

Questions Cloud

How far are the spectators from each other : Two spectators at a soccer game in Montjuic Stadium see, and a moment later hear, the ball being kicked on the playing field. How far are the spectators from each other
Determine the largest angle that the crutch can have : The person in the drawing is standing on crutches. Assume that the force exerted on each crutch by the ground is directed along the crutch, as the force vectors in the drawing indicate. Determine the largest angle that the crutch can have
Fast forward to current day and give : Based on the video, fast forward to current day and give your opinion on whether or not Apple's product strategy should change given its current rate of success and potential competing companies (i.e. Samsung, etc.) operating within their marke..
How much time is required for the penguin : A penguin slides at a constant velocity of 1.55 m/s down an icy incline. The incline slopes above the horizontal at an angle of 7.08°. How much time is required for the penguin to slide to a halt after entering the horizontal patch of ice
Measured with a digital data acquisition system : A voltage signal is produced by a transducer.  The signal contains its strongest frequency component at 50 Hz (amplitude = 5.0 V), plus a weaker component at the second harmonic (100 Hz) with amplitude 2.0 V. In addition, there is noise at 60 Hz with..
Find the magnitude of the thrust needed to reduce velocity : Assuming the descent is vertical, find the magnitude of the thrust needed to reduce the velocity to zero at the instant when the craft touches the lunar surface
Exit to the mixing chamber water is saturated water vapor : Superheated steam at 400°C and saturated water with a quality of 40% enter a mixing chamber at a pressure of 100 kPa. What is the required ratio of mass flow rate of superheated steam to mass flow rater of saturated water if at the exit to the mixing..
What is the magnitude of the horizontal net force : A 1980-kg car is traveling with a speed of 18.5 m/s. What is the magnitude of the horizontal net force that is required to bring the car to a halt in a distance of 43.8 m
Regenerative rankine cycle with one closed feedwater heater : Water is the working fluid in an ideal regenerative Rankine cycle with one closed feedwater heater. Superheated vapor enters the turbine at 10 MPa, 480 C and the condenser pressure is 6 kPa. Steam expands through the first stage turbine where some is..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Package design

Package Design Brief: Assume you are the packaging engineer for a large consumer products company. In this company, the Packaging Design Briefs are initiated by the marketing group and forwarded to the Package Engineering group.

  Mechanical engineering questions

Define dynamic viscosity, Determine the centroid, Pressure due to the height of liquid, Advantage of changing the liquid, Calculate the total moment about the hinge of the seal gate.

  Automatic control

DOF system and Find the differential equation describing the system

  Write a paper on boyle''s law

Write a paper on Boyle's law and describe Compression and Combustion stroke . Also explain Charles's law and illustrate SI engine and CI engine.

  Verify the law for parallelogram of forces

To Verify the law for parallelogram of forces, law for triangle of forces and law of polygon of forces. These laws are very useful to calculate unknown forces in very short time.

  Discharge pressure of the compressor

What is the discharge revised discharge pressure of the compressor.

  The Case for Global Accounting Standards

The role of IFRS in both developing and developed capital markets.

  Wind turbine

Wind turbines are becoming more and more common as a method of energy production, wind turbines by their very nature are dynamic and are subject to and create their own internal and external kinematics and kinetics.

  Advanced design methodologies

8 x product engineering and design review (week 2 – 12), ~3 pages per item which must contain a brief description of the product then delve into concepts such as materials selection, manufacturing methods, life cycle analysis, recyclability and overa..

  Design of absorption column and the cooler

Design of absorption column and the cooler. Process design of other units should be completed along with pipe sizes.

  Determine the maximum total bending moment

Determine maximum total bending moment (static plus dynamic) of the beam under steady-state conditions.

  Force of the water on the gate

Determine the magnitude of the horizontal and vertical components of the force of the water on the gate.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd