Find the pd gain that produce the fastest system response

Assignment Help Mechanical Engineering
Reference no: EM131074739

Applied Controls - PID Controller Tuning II

For this laboratory you will continue to use your MATLAB program to simulate a closed loop PID controller system. For this lab we are going to modify our prior model to simulate a disturbance and you are to tune the controller to achieve the desired response. Each individual will use the same assigned system as in PID Controller Tuning Lab I.

1. Modify your prior Simulink PID feedback controller model to include a summing junction between the controller and the system. This will be the input for the disturbance.

2. Find the PD gain that produce the fastest system response to a step disturbance with a maximum of 25% overshoot, Find the steady state error and plot the result

3. Find the PID gains that produce the fastest system response to a step disturbance and close to zero steady state error. Plot the result.

4. Test the controller gains from #2 and #3 with a step input and plot the results.

5. Test the PD and PID controller gains found in the first PID controller tuning lab using a step disturbance and plot the results.

6. Write up your results as a short memo with your system model, the graphs and discussing the performance of the different controllers.

I want you to do PID controller tuning II. It is a follow on lab from a previous assignment so I've included that assignment as well in the ZIP file. If at all possible if you could have the same person who did my last submission does this one as well I would appreciate it.

Attachment:- pid-controller-tuning-1.zip

Reference no: EM131074739

Questions Cloud

What potential torts are demonstrated in the scenario : What potential torts are demonstrated in the scenario?
Adam opportunity cost of producing : What is Adam's opportunity cost of producing one shirt? Adam's opportunity cost is 12 ? Is this correct?
Profit maximising for the firm : Use an economic argument to explain why, in your example in part a, it might be profit maximising for the firm to use both mechanisms rather than just using one mechanism?
Analyze the different liability in this case : Analyze the different liability in this case if the sexual harasser were an independent contractor versus an employee. Cite at least five peer-reviewed sources. Format your paper consistent with APA guidelines.
Find the pd gain that produce the fastest system response : MECH 436 Applied Controls - PID Controller Tuning II. Find the PD gain that produce the fastest system response to a step disturbance with a maximum of 25% overshoot, Find the steady state error and plot the result
Create a new best practice for hr management : Create a new best practice for HR management
Discuss how cultural diversity can affect the workplace : Cultural diversity is defined as how each person's culture is different from others. Discuss how cultural diversity can affect the workplace. How does community diversity and generational diversity affect the workplace? What do you believe a cultu..
Provide a literature review of how vlan can be used : Routing and Switching - As a network administrator provide a literature review of how VLAN can be used in different scenarios to enhance the security of a network.
Data on levels of imports and exports : Provide data on levels of imports and exports throughout 2000-2010. (Annual numbers for each year is ideal)  Look at the value of imports and exports in real (inflation-adjusted) dollars or you can present them as a % of GDP.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A frictionless piston-cylinder device contains 16 lbm of

a frictionless piston-cylinder device contains 16 lbm of superheated water vapor at 40psia and 600 degrees fahrenheit.

  Maximum heat demand for freezing is twice average demand

It is desired to establish freezing of 10,000 loaves of bread each weighing 0.75 kg from an initial room temperature of 18°C to a final store temperature of -18°C. If this is to be carried out in such a way that the maximum heat demand for the free..

  Determine the magnitudes of forces fa and fb acting on each

determine the magnitudes of forces FA and FB acting on each chain and the orientation ? of FB so that the magnitude of FB is a minimum.

  Determine the instantaneous heat input

A power plant produces 1000 MW of electricity and uses residential oil as the fuel. The oil has a heating value, the maximum energy liberated in combustion, of 43 000 kJ/kg. The overall efficiency of the power plant is 52%.

  Assume that a jet touches down 170 mph and its speed is

assume that a jet touches down 170 mph and its speed is reduced to zero in 240 ft. assuming a constant deceleration

  A basketball of mass 0570 kg is dropped from rest from a

a basketball of mass 0.570 kg is dropped from rest from a height of 1.25 m. it rebounds to a height of 0.734 m. a how

  A 327 m3 tank contains 100kg of nitrogen at 225 k determine

a 3.27 m3 tank contains 100kg of nitrogen at 225 k. determine the pressure in the tank using the followinga the

  Steam power plant operates between the pressure limits

A steam power plant operates between the pressure limits of 4.5MPa and 15kPa. Steam enters the pump as saturated liquid and leaves the turbine as saturated vapor. Determine the ratio of the work delivered by the turbine to the work consumed by the pu..

  Allowable point resistance for a base movement

A drilled shaft in a medium sand is shown in Figure P10.9. Using the method proposed by Reese and O'Neill, determine the following: a. The net allowable point resistance for a base movement of 25 mm

  After drawing a neat and clear schematic of the geometry

a 5 ft3 tank containing steam at 14.7 psia 1 quality is fitted with a relief valve. heat is transferred to the tank

  Determine a the pump work wk per kilogram of steam b the

steam having a specific enthalpy of 160 kjkg and pressure of 1 kpa enters as adiabatic pump. upon leaving the pump the

  After load p is applied joint b moves to the coordinate

the two bars shown in the figure are used to support a load p. when unloaded joint b has coordinates 0 0. after load p

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd