Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A line charge of density (rho)l [C/m] is in the form of a semicircle of radius a lying on the x-y plane with its center located at the origin. The semicircle starts at (phi)= pie / 2 and ends at phi = 3(pie) / 2 in cylindrical coordinates. Find the electric field vector E at the origin for the cases in which
(a) the line charge density (rho)l = (rho)l0 is a constant, and
(b) the line charge density varies along the semicircular ring as (rho)l = A cos(phi).
A Widlar Current Source is designed to limit the load current to the reference current by using a resistor at the emitter end by:I(load)*R(Emitter)=Vt ln (I(ref)/I(load))=VBE(Ref)-VBE(Load)
A dc series motor of 230 V, 12 hp, 1200 rpm is connected to a 230 V supply. It draws a current of 40 A, and rotates at 1200 rpm. Ra = 0.25 ohms and Rs = 0.1 ohms. Assume magnetic linearity.
For the system described by the following equations, with the input x(t) and output y(t), determine which are invertible systems and which are noninvertible. For the invertible systems, find the input-output relationships of the inverse system.
A switch with a single-bit output chooses which of the two 8-bit streams will be passed on a display's single 8-bit input. Create a circuit to connect the two video sources, the switch, and the display. Use at least one mux(a single mux or an N-bi..
Two bars of silicon, one n-type and one p-type, are uniformly doped so that ND(bar1) = NA(bar2) = 3.7x1016 cm-3. a) Without calculations: which bar will exhibit the larger resistivity and why
Consider a linear circuit with a single voltage source Vs = 1 V and 2000 resistors. The circuit has no other sources. The current through one of the resistors in this circuit is measured to be 5 mA. If the voltage source is changed from 1 V
When a HIGH is on the output of the decoding circuit below, what is the binary code appearing on the inputs?
Write an assembly code for a subroutine implementing signed multiplication with Booth's algorithm. Make sure it works as expected. Compare it with your implementation of sign/magnitude multiplication from the second homework.
Consider 4 point charges of 10nC each located at A(1,0,0), B(-1,0,0), C(0,1,0) and D (0,-1,0) in free space. Find the total force F(not field) on the charge A.
Calculate: a. The rated primary and secondary currents b. The secondary voltage if it is connected at full load of 2000 kW c. The voltage regulation from no-load to full load. Voltage regulation is given by: (E(no-load)-E (full-load))/E(full-load)..
Improve the controller designed in part by introducing a mechanism for the disturbance compensation at the plant input. Illustrate advantage of the improved controller by applying the fast varying piecewise constant reference input vector and sinu..
A 15 hp, 209V,three-phase,six pole, Y-connected induction motor has the following parameter values per phase: R1= 0.128 ohm, R'2=0.0935 ohm Xeq- X1 + X'2 = 0.49 ohm. The motor slip at full load is 3%, and the efficiency id 90%.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd