Fastening the hook to the wire causes stress concentrations

Assignment Help Mechanical Engineering

Reference no: EM13701652

A crane has a loading hook that is hanging in a steel wire. The allowable normal tensile stress in the wire gives an allowable force of 100,000 N. Estimate the safety factor that should be used.

a- The wire material is not controlled, the load can cause impact, and fastening the hook to the wire causes stress concentrations.

b- The wire material is extremely well controlled, no impact loads are applied and the hook is fastened in the wire without stress concentrations.

Reference no: EM13701652

Questions Cloud

What types of fraudulent activity occurred : Research and identify at least two companies that have experienced fraudulent activity and identify at least three credible sources that you will use to gather your information.

A reaction turbine is supplied with steam : A reaction turbine is supplied with steam at 60 bars and 600 degree Celsius. The condenser pressure is 0.07 bar. If reheat factor can be assumed to be 1.04 and stage efficiency is constant throughout at 80% calculate the steam flow required for a dia..

Calculate the analysis of the wet product of combustion : In the actual combustion of benzene in an engine the A/F ratio was 12/1. Calculate the analysis of the wet product of combustion. A thermometer inserted into an air steam flowing at 33.5 m/s records a temperature of 15 degree Celsius; the static pres..

Design a suitable mechanism to hold the tube : Design a suitable mechanism to hold the tube within its range of adjustment. Identify loads acting on the mechanism and perform necessary stress calculations to size various parts.

Fastening the hook to the wire causes stress concentrations : A crane has a loading hook that is hanging in a steel wire. The allowable normal tensile stress in the wire gives an allowable force of 100,000 N. Estimate the safety factor that should be used.

Presence or abseabsence of pyridene : What is the difference in the stereo chemistry of the reaction when darzen process is carried out in the presence or abseabsence of pyridene

Determine the systems thermal efficiency : Air enters a three-stage gas turbine at 100 kPa and 17 degree Celsius. This system uses a regenerator as well as reheating and interfolding. The pressure ratio across each compressor is 14.16; 300 kJ/kg of heat are added to the air in each combustion..

Determine the new velocity at the nozzle exit : Air at 22 kPa, 220K and 250 m/s enters a turbojet engine in flight at an altitude of 10,000m. The diffusor slows the air down to a very low speed relative to its inlet. The pressure ratio across the compressor is 12. The turbine inlet temperature is ..

Instantaneous braking force developed for initial velocities : A 1200 kg car is travelling at a high rate of speed (V0) as it reaches the summit of a small hill that can be approximated by the equation y=1.25sin(0.3x)+cos (0.07x)-5 from x= 0 to 50m. At the summit of the hill a deer runs in front of the car, and ..

User Account

All Pages