Explain electrical contacts are placed at opposite ends

Reference no: EM13488831

A thin piece of semiconducting silicon will be used to fabricate an electrical device. This layer is 0.10 cm thick and cut into a strip 0.50 cm wide by 1.50 cm long. Electrical contacts are placed at opposite ends of its length. The intrinsic carrier concentration of the silicon at room temperature (300K) is 1.0x10^10 cm^3 and the bandgap energy is 1.12 eV. With this data answer the following questions. (a) If the application of 1.0 volt to the contacts results in a current of 0.019 amps, what is the resistivity in (ohm-cm) of the material? (b) If the material's conductivity is due to doping with aluminum to a level of [Al]= 1x10^10 atoms/cm^3 what is the resulting conductivity "type" and what is the mobility of these "majority" carriers in this material (assuming that the aluminum is fully ionized - i.e. all Al atoms donated electrons).

Reference no: EM13488831

Questions Cloud

Compute frictional force was applied by the brake pad : A uniform 2.95- kg spinning disk with a radius of 0.243 m is brought to rest by a brake-pad pressed against the side 0.165 m from the rotation axis. What frictional force was applied by the brake pad

Define the vibrational frequencies of chromophores : Why don't you see the effect of rotation on the vibrational frequencies of chromophores in a polyatomic molecule in the liquid phase

Evaluate the conductivity of the material : A semiconductor of n-type is know to have an electron concentration of 3 x 10^18 m ^3 if the electron drift velocity is 100 m/s in an electric field of 500 V/m, calculate the conductivity of this material.

Calculate how deep is the reservoir : The gauge pressure at the bottom of a reservoir is 7.0 times what it is at a depth of 1.3 m. How deep is the reservoir

Explain electrical contacts are placed at opposite ends : A thin piece of semiconducting silicon will be used to fabricate an electrical device. This layer is 0.10 cm thick and cut into a strip 0.50 cm wide by 1.50 cm long. Electrical contacts are placed at opposite ends of its length.

Explain what will be the final temperature of the system : If a 1.00 cm^3 solid cube of alumina ceramic initially at 300 C is placed in 50 ml of H2O initially at 25C in a closed, insulated container: (a) what will be the final temperature of the system when thermal equilibrium is attained.

Discuss if tony has any tax implication : Students should be able to identify and apply legislation and case law to the issues identified as well as demonstrates the ability to analyses the issues fully and discusses the application of taxation principles.

How much chemical energy is used : A 47% efficient device uses chemical energy to generate 550J of electric energy. How much chemical energy is used

Evaluate the mass of cuso4*h2o : Calculate the mass of CuSO4*H2O needed to prepare 3.0 g of [Cu(NH3)4]SO4*H2O, assuming a 90% yield.

User Account

All Pages